Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 2GB DDR3 1600 PC3-12800 CL11 1Rx8 204-pin 1.5V Non-ECC SODIMM memory upgrade

SKU CH-WY2X-00GYQ

2GB DDR3 1600 SODIMM module compatible with Synology DS1512+, DS1513+, DS1812+, DS1813+ and DS2413+ NAS systems

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • 2GB capacity adds memory headroom for Synology NAS multitasking
  • DDR3 1600 speed matches PC3-12800 spec for compatible systems
  • CL11 latency and 1.5V voltage meet JEDEC standard operation
  • 204-pin SODIMM form factor fits DS1512+, DS1513+, DS1812+, DS1813+, DS2413+
  • Non-ECC unbuffered 1Rx8 design ensures warranty-safe drop-in upgrade

System-Specific DDR3 SODIMM

This 2 GB DDR3 module is built for Synology NAS units DS1512+, DS1513+, DS1812+, DS1813+ and DS2413+. It delivers a straightforward capacity boost for owners of those models who need more memory for everyday file serving and light virtualization tasks.

1Rx8 CL11 at 1.5 V

The stick runs at DDR3-1600 (PC3-12800) with a CAS latency of 11, uses a single-rank 1Rx8 organisation and operates at the standard 1.5 V. JEDEC compliance guarantees the timing and voltage match the platforms listed above.

Unbuffered non-ECC 204-pin form factor

The SODIMM fits the 204-pin slots in the compatible Synology units without a heat spreader, leaving adjacent bays clear. It is not suitable for systems that require ECC, registered modules or a different DDR generation.

Puncte forte

  • 2GB capacity adds memory headroom for Synology NAS multitasking
  • DDR3 1600 speed matches PC3-12800 spec for compatible systems
  • CL11 latency and 1.5V voltage meet JEDEC standard operation
  • 204-pin SODIMM form factor fits DS1512+, DS1513+, DS1812+, DS1813+, DS2413+
  • Non-ECC unbuffered 1Rx8 design ensures warranty-safe drop-in upgrade

Specificații

BrandOWC
Part Number1S6D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS DS1512+
Synology NAS DS1513+
Synology NAS DS1812+
Synology NAS DS1813+
Synology NAS DS2413+

Întrebări despre acest articol

What does the PC3-12800 1600MHz rating mean once the module is installed in a Synology NAS?

The module runs at 1600MHz with a peak transfer rate of 12800 MB/s, matching the JEDEC DDR3 standard the NAS memory controller expects.

How does the 204-pin SODIMM interface limit what this module can do in a DS1512+ or DS1813+?

The 204-pin SODIMM slot accepts only unbuffered non-ECC DDR3 at 1.5V, so the module cannot use registered or ECC signalling even if the chipset supports it.

Will the 1Rx8 2GB stick fit the memory compartment in a DS2413+ without a heat spreader?

Yes, the low-profile 204-pin SODIMM has no heat spreader and fits the standard laptop-style slot used in all listed Synology models.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.