Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR4 SODIMM sticks with black chips, no heat spreader

OWC

OWC 32GB (2x16GB) DDR4 2666MHz CL19 ECC SODIMM FS1018

SKU CH-AKJ7-DQQVK

32 GB DDR4 ECC SODIMM kit with two 16 GB modules running at 2666 MHz CL19 for Synology FlashStation FS1018

  • Capacity32GB (2 x 16GB)
  • Type260-Pin DDR4 ECC SODIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • 32GB total capacity with two 16GB modules
  • DDR4 2666MHz CL19 speed for responsive NAS operation
  • ECC unbuffered design protects data integrity
  • 2V low voltage reduces power draw
  • JEDEC and RoHS compliant for warranty-safe upgrade

Synology FS1018 memory kit

This OWC kit delivers 32 GB of DDR4 ECC SODIMM memory in two 16 GB modules built for the Synology FlashStation FS1018. It runs at 2666 MHz with CL19 latency and 1.2 V operation. The unbuffered 2Rx8 design meets JEDEC and RoHS standards for a warranty-safe upgrade.

Capacity and headroom

The 32 GB total capacity lets the FS1018 handle larger file caches, more concurrent virtual machines and heavier database workloads without swapping. Dual-rank 2Rx8 organisation provides density for the platform's four slots. Systems needing more than 32 GB or registered DIMM support cannot use this kit.

Thermals noise and power

Modules operate at the standard 1.2 V DDR4 voltage with no heat spreaders, relying on the NAS chassis airflow for cooling. Passive operation adds no audible noise. Power draw stays within the platform's default memory budget so no extra power provisioning is required.

Puncte forte

  • 32GB total capacity with two 16GB modules
  • DDR4 2666MHz CL19 speed for responsive NAS operation
  • ECC unbuffered design protects data integrity
  • 2V low voltage reduces power draw
  • JEDEC and RoHS compliant for warranty-safe upgrade

Specificații

BrandOWC
Part Number2C6D42R8032P
Capacity32GB (2 x 16GB)
Type260-Pin DDR4 ECC SODIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSynology FlashstationFS1018

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will these 2666 MHz modules run stably alongside my existing 2400 MHz DDR4 sticks in the FS1018?

Yes, the kit is backward compatible with 2400 MHz and 2133 MHz DDR4, so it will clock down to match the slower modules already installed.

How can I verify the ECC function is active after installing the 2Rx8 SODIMMs?

Check the Synology DSM Resource Monitor or system log; it will report ECC memory detected and show corrected error counts if any occur.

Does the 32 GB kit include only the two 16 GB SODIMMs or are tools and cables supplied?

The box contains only the two 260-pin DDR4 ECC SODIMM modules; no tools, cables or additional hardware are included.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.