Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular 260-pin DDR4 SODIMM module with black chips no heat spreader

OWC

OWC 4GB DDR4 2133MHz CL15 1.2V 260pin SODIMM HP Envy 27 memory upgrade

SKU CH-5HKZ-BTAQ1

A 4 GB DDR4 SODIMM running at 2133 MHz CL15, validated for HP Envy 27-b105nl, 27-b107na, 27-b109na, 27-b110 and 27-b110nb

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boost responsiveness with 4 GB DDR4 2133 MHz CL15 memory
  • Low 1.2 V operation reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 27 all-in-one models
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Single-rank 1Rx8 unbuffered design ensures broad compatibility

Targeted HP Envy 27 upgrade

This 4GB DDR4 SODIMM is built specifically for HP Envy 27 all-in-one models including the 27-b105nl, 27-b107na, 27-b109na, 27-b110 and 27-b110nb. It provides a direct, warranty-safe memory increase for owners of those systems who need more capacity for everyday multitasking. The module arrives new and ready to install without configuration changes.

Steady throughput at JEDEC limits

Rated at 2133MHz with CL15 latency and 1.2V operation, the module delivers consistent bandwidth during extended workloads rather than only in short bursts. Unbuffered, non-ECC construction and 1Rx8 organisation keep signal timing stable across long sessions. JEDEC compliance ensures the memory sustains its rated speed without relying on overclocking headroom that the platform cannot use.

DDR4 SODIMM ceiling for this platform

The 260-pin DDR4 interface tops out at the PC4-17000 data rate on these Envy 27 systems, so this module reaches the practical ceiling the chipset and firmware allow. Builders who need more storage or a second graphics card cannot address those needs with memory alone. The single 4GB rank also means total capacity is limited by the number of slots the mainboard provides.

Puncte forte

  • Boost responsiveness with 4 GB DDR4 2133 MHz CL15 memory
  • Low 1.2 V operation reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 27 all-in-one models
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Single-rank 1Rx8 unbuffered design ensures broad compatibility

Specificații

BrandOWC
Part Number2S1D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 27-b105nl
HP ENVY 27-b107na
HP ENVY 27-b109na
HP ENVY 27-b110
HP ENVY 27-b110nb

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 1.2V DDR4 module run cool inside an HP Envy 27 all-in-one all day?

The SODIMM operates at the standard 1.2 V DDR4 voltage and has no heat spreader, so it draws minimal power and stays cool during continuous use.

What must the HP Envy 27 already have to accept this 260-pin SODIMM?

The system needs a free DDR4 SO-DIMM slot that supports 2133 MHz PC4-17000 non-ECC unbuffered memory.

Will this CL15 2133 MHz stick work alongside the original memory in an Envy 27-b110?

Yes, it matches the factory speed, latency and voltage, so it will run in dual-channel with the existing module.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.