Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

OWC

OWC 4GB DDR4 2133MHz CL15 1.2V 288pin Non-ECC UDIMM memory upgrade

SKU CH-1DA8-DA0P0

4GB DDR4 2133MHz CL15 UDIMM upgrade for HP ProDesk 400 G3, 490 G3 and 600 G2 desktops

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • 4GB capacity lets you run more applications simultaneously
  • DDR4 2133MHz speed with CL15 latency delivers responsive system performance
  • 2V low-voltage operation reduces power consumption and heat
  • 288-pin UDIMM form factor fits HP ProDesk 400 G3, 490 G3 and 600 G2 desktops
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Targeted HP ProDesk Upgrade

This 4 GB DDR4 2133 MHz CL15 module is built for HP ProDesk 400 G3 SFF, 400 G3 Tower, 490 G3, 600 G2 SFF and 600 G2 Tower systems. It suits owners who need a straightforward capacity increase for everyday multitasking. Buyers whose machines require ECC or registered memory will not be served by this non-ECC unbuffered DIMM.

Simple Slot-In Installation

The 288-pin UDIMM drops into a standard DDR4 desktop slot and runs at 1.2 V with no extra configuration. Alignment notches prevent backward insertion, and the lack of a heat spreader keeps the profile low for tight SFF chassis. The main risk is exceeding the board’s maximum supported capacity per slot, which this module does not guarantee.

Verify Slot Count And Maximum Capacity

Confirm how many DIMM slots your specific ProDesk model provides and what total memory the motherboard and BIOS will accept. The 1Rx8 organisation works with typical consumer chipsets, but some OEM boards limit rank population per channel. Check the system manual or vendor documentation before ordering.

Puncte forte

  • 4GB capacity lets you run more applications simultaneously
  • DDR4 2133MHz speed with CL15 latency delivers responsive system performance
  • 2V low-voltage operation reduces power consumption and heat
  • 288-pin UDIMM form factor fits HP ProDesk 400 G3, 490 G3 and 600 G2 desktops
  • JEDEC and RoHS compliant for a warranty-safe upgrade

Specificații

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G3 SFF
HP ProDesk 400 G3 Tower
HP ProDesk 490 G3
HP ProDesk 600 G2 SFF
HP ProDesk 600 G2 Tower

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How can I confirm the OWC 4GB DDR4 2133MHz CL15 module is running at the correct speed after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the memory reports DDR4-2133 with CL15 timings at 1.2V.

What is included with the OWC 4GB DDR4 2133MHz CL15 288-pin UDIMM and what must be purchased separately?

The box contains one 4GB DDR4 2133MHz CL15 1.2V 288-pin Non-ECC UDIMM module; no cables, brackets or additional parts are supplied.

Which OWC DDR4 2133MHz CL15 capacity should I choose for an HP ProDesk 400 G3 SFF?

This 4GB module (part 2U1D41R804GB) is validated for the HP ProDesk 400 G3 SFF; select higher-capacity kits from the same DDR4-2133 CL15 family if more memory is needed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.