Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black chips and gold edge contacts

OWC

OWC 8GB DDR3 1333 CL9 2Rx4 240-pin 1.5V ECC RDIMM Supermicro X8DA6 X8DAE X8DAH+ X8DAL X8DT3

SKU CH-Z24Y-QZRJV

8 GB DDR3 1333 ECC registered RDIMM for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 motherboards

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • 8 GB capacity expands server memory headroom
  • DDR3 1333 CL9 speed matches platform spec
  • ECC registered design protects data integrity
  • 2Rx4 240-pin 1.5 V layout fits Supermicro X8 boards
  • Replaces six Supermicro part numbers for easy sourcing

Server Memory Upgrade

This 8 GB DDR3 ECC registered DIMM is built for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 motherboards. It targets administrators who need to extend the service life of existing server infrastructure or add capacity to a new build using validated components.

Registered ECC Requirement

The module operates as 2Rx4 registered memory with ECC at 1.5 V and CL9 latency. It will not function in standard desktop platforms and cannot be mixed with unbuffered DIMMs, so the host system must explicitly support registered ECC DDR3.

Sustained Operation

JEDEC and RoHS compliance plus per-module lab testing ensure electrical stability during continuous server workloads. The registered buffer reduces signal loading on the memory controller, helping maintain data integrity over long uptime periods.

Puncte forte

  • 8 GB capacity expands server memory headroom
  • DDR3 1333 CL9 speed matches platform spec
  • ECC registered design protects data integrity
  • 2Rx4 240-pin 1.5 V layout fits Supermicro X8 boards
  • Replaces six Supermicro part numbers for easy sourcing

Specificații

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DA6 Series
Supermicro Motherboard X8DAE Series
Supermicro Motherboard X8DAH+ Series
Supermicro Motherboard X8DAL Series
Supermicro Motherboard X8DT3 Series

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 1333 MHz rating actually run at that speed in my Supermicro X8DAE?

The module is rated DDR3 1333 (PC3-10600) and will operate at that frequency provided the motherboard memory controller and BIOS support 1333 MT/s.

Does the registered ECC design limit which slots I can populate on the X8DAH+?

Registered ECC RDIMMs are required for these Supermicro boards; they must not be mixed with unbuffered DIMMs, but any supported slot can be used.

Will the 240-pin 1.5 V form factor fit the X8DAL DIMM sockets without a heat spreader?

Yes, the 240-pin DDR3 RDIMM at 1.5 V matches the X8DAL socket keying and voltage; the module has no heat spreader so it fits standard server DIMM spacing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.