Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular 204-pin DDR3L SODIMM module with black chips

OWC

OWC 8GB DDR3L 1600 CL11 2Rx8 1.35V SODIMM for NCR POS P1532/P1535

SKU CH-N2SF-7BWVN

8GB DDR3L 1600 CL11 SODIMM module designed for NCR POS P1532 and P1535 systems

  • Capacity8GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • 8GB DDR3L 1600 module boosts POS multitasking
  • 35V low-voltage design cuts power draw in NCR terminals
  • CL11 latency keeps transaction processing responsive
  • 204-pin SODIMM fits P1532 (7734) and P1535 (7761) slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrades

OWC 8GB DDR3L 1600 SODIMM for NCR POS

This 8GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It uses a 204-pin SODIMM form factor in a 2Rx8 unbuffered non-ECC configuration. The part is built to JEDEC and RoHS standards for warranty-safe upgrades. It targets the NCR POS P1532 and P1535 systems specifically.

Suits NCR P1532 or P1535 memory upgrades

Shops upgrading an NCR POS P1532 (7734) or P1535 (7761) can install this single 8GB stick directly. Builders needing ECC error correction or registered buffering should look elsewhere. Systems requiring a different DDR generation, voltage, or pin count cannot use this module. Buyers wanting capacities other than 8GB must choose another part.

204-pin DDR3L 1.35V SODIMM decides fit

The 204-pin DDR3L interface at 1.35V is the single specification that determines whether this module fits the slot. Only NCR POS P1532 (7734) and P1535 (7761) platforms are validated for this part number. Match the DDR3L 1600 PC3L-12800 CL11 2Rx8 profile exactly before ordering. Any deviation in voltage, pin count, or DDR generation prevents installation.

Puncte forte

  • 8GB DDR3L 1600 module boosts POS multitasking
  • 35V low-voltage design cuts power draw in NCR terminals
  • CL11 latency keeps transaction processing responsive
  • 204-pin SODIMM fits P1532 (7734) and P1535 (7761) slots directly
  • JEDEC and RoHS compliant for warranty-safe upgrades

Specificații

BrandOWC
Part Number1S6T32R808GB
Capacity8GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemNCR POS P1532 NCR POS (7734)
NCR POS P1535 NCR POS (7761)

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 204-pin SODIMM fit the NCR POS P1532 and P1535 memory slots?

Yes, the 204-pin DDR3L SODIMM is designed for the NCR POS P1532 (7734) and P1535 (7761) systems.

How do I install the module and what step is often missed?

Power off the terminal, open the memory cover, align the notch on the 204-pin edge connector, press firmly until both side clips click, then verify 8GB appears in BIOS.

Will the 1.35V DDR3L module need replacement or voltage adjustment later?

The module runs at the standard 1.35V JEDEC voltage with no adjustment required; it is a non-ECC unbuffered part with no moving components to service.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.