Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips, 260-pin SODIMM form factor

OWC

OWC 8GB DDR4 3200MHz CL22 SODIMM memory upgrade for Dell OptiPlex 7010 7080 7090 7400

SKU CH-G538-2WRRE

8 GB DDR4 SODIMM running at 3200 MHz CL22 for Dell OptiPlex 7010, 7080, 7090 and 7400 systems

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • Boosts responsiveness with 8 GB DDR4 3200 MHz CL22
  • Fits Dell OptiPlex 7010, 7080, 7090 Micro, 7090 Ultra, 7400 AIO
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Low 1.2 V operation keeps power draw minimal
  • Simple 260-pin SODIMM install for easy DIY memory expansion

OWC 8GB DDR4 3200MHz SODIMM

This OWC module is an 8GB DDR4 SODIMM built for Dell OptiPlex 7010 Micro, 7080 Micro, 7090 Micro, 7090 Ultra and 7400 AIO systems. It arrives new and ready to install in compatible small-form-factor desktops and all-in-one units.

Speed and latency for the listed OptiPlex models

The stick runs at DDR4 3200 (PC4-25600) with a CAS latency of CL22 and operates at 1.2V. These exact figures decide whether the part matches the memory controller requirements of the supported OptiPlex platforms.

260-pin unbuffered non-ECC fit

The 260-pin unbuffered non-ECC form factor slots directly into the SODIMM sockets of the listed Dell models without adapters. It leaves other expansion slots and drive bays untouched while adding 8GB of capacity. Builders who need ECC, registered modules or a different pin count cannot use this kit.

Puncte forte

  • Boosts responsiveness with 8 GB DDR4 3200 MHz CL22
  • Fits Dell OptiPlex 7010, 7080, 7090 Micro, 7090 Ultra, 7400 AIO
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Low 1.2 V operation keeps power draw minimal
  • Simple 260-pin SODIMM install for easy DIY memory expansion

Specificații

BrandOWC
Part Number3S2D41R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7010 Micro
Dell OptiPlex 7080 Micro
Dell OptiPlex 7090 Micro
Dell OptiPlex 7090 Ultra
Dell OptiPlex 7400 AIO

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How does the 3200 MHz speed translate to real-world performance in my OptiPlex?

The module runs at the DDR4 3200 JEDEC standard (PC4-25600), so the system memory controller will operate it at its rated 3200 MT/s without overclocking.

What does the 260-pin SODIMM interface mean for installation?

It uses the standard 260-pin DDR4 SODIMM form factor, keyed only for DDR4 slots in the compatible OptiPlex Micro and AIO systems.

Will this 8 GB stick fit inside the tight chassis of a 7090 Micro or 7400 AIO?

Yes, the low-profile SODIMM has no heat spreader and matches the exact 260-pin DDR4 layout required by the 7010, 7080, 7090 Micro, 7090 Ultra and 7400 AIO.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.