Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Three 1.75 mm silk PLA spools in red white and blue each 1 kg net weight

PrintOxe

PrintOxe PLA like SILK Filament 3-Pack Red White Blue 1.75mm 3kg

SKU CH-JH03-69YRD

Three spools of 1.75 mm PLA silk filament in red, white and blue totalling 6.6 lb with ±0.03 mm accuracy

  • ColorMulti-color
  • TypeFilament
  • Three vibrant colours in one pack for varied prints
  • Precise ±.03 mm diameter for reliable extrusion
  • Silk finish gives high-gloss surfaces straight off the printer
  • 100 % corn-starch PLA reduces warping and clogging
  • Vacuum-sealed with desiccant to keep filament dry

PrintOxe PLA Silk 3-Pack Filament

This set contains three 1-kilogram spools of 1.75 mm PLA filament in red, white, and blue. The material uses a silk formula that produces a high-gloss, shiny surface finish on printed parts. Total net weight is 3 kilograms. Each spool is vacuum-sealed with desiccant to protect against moisture.

Suits most desktop FDM printers using 1.75 mm PLA

The dimensional accuracy of +/- 0.03 mm and 100 percent new high-purity material reduce shrinkage, warping, clogging and blistering. The spool dimensions are 7.88 inch diameter, 2.69 inch width with a 2.20 inch hub hole. Makers who need engineering-grade strength, high-temperature resistance or flexible filaments should look at other materials.

1.75 mm diameter with +/- 0.03 mm tolerance

This specification determines whether the filament will feed reliably through the extruder and hot-end of a given printer. The silk texture PLA prints at standard PLA temperatures without requiring a heated chamber. Compatibility with specific printer models should be verified against the machine's filament requirements.

Puncte forte

  • Three vibrant colours in one pack for varied prints
  • Precise ±.03 mm diameter for reliable extrusion
  • Silk finish gives high-gloss surfaces straight off the printer
  • 100 % corn-starch PLA reduces warping and clogging
  • Vacuum-sealed with desiccant to keep filament dry

Specificații

BrandPrintOxe
ModelPLA like SILK
ColorMulti-color
TypeFilament

Întrebări despre acest articol

Will the 1.75 mm diameter and +/- 0.03 mm accuracy work reliably on an older printer that has a Bowden tube?

Yes — the filament is manufactured to 1.75 mm with a tolerance of +/- 0.03 mm, which matches the spec used by Bowden-style printers such as older MakerBot, RepRap or Printrbot models listed in the compatibility notes.

How can I confirm the silk finish is printing correctly after the first layer?

The first layers should show a uniform high-gloss sheen with no dull patches; if the surface looks even and reflective under normal light, the silk formulation is behaving as intended.

What exactly comes in the box and do I need to buy spool adapters separately?

The box contains three vacuum-sealed 1 kg spools — red, white and blue — each on a 7.88" diameter spool with a 2.20" hub hole; most printers accept this hub size directly, so separate adapters are only needed if your machine uses a different hub diameter.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.