PUSKILL
PUSKILL 2.5" SATA internal SSD 480GB
2.5-inch SATA internal SSD with 480GB capacity for desktops, laptops and mini PCs
- Device TypeInternal Solid State Drive (SSD)
- Capacity480GB
- SATA 3.0 interface delivers up to 600 MB/s sequential throughput
- Backward compatible with SATA 2.0 and 1.5 Gb/s ports
- 5 inch form factor fits desktops, laptops and mini PCs
- 480 GB usable capacity after 0.93 formatting factor
- Drive requires initialisation before first use
PUSKILL 2.5" SATA SSD 480GB
The PUSKILL 2.5 inch SATA internal SSD provides 480GB of flash storage for desktops, laptops, mini PCs and all-in-one systems. It uses the SATA 3.0 interface and is backward compatible with SATA 2.0. The drive must be initialised before first use.
Capacity and real-world headroom
The labelled capacity is 480GB; the usable space is approximately capacity multiplied by 0.93 due to the international standard where 1000 KB equals 1 MB. On a SATA 3.0 link the interface ceiling is 600MB/s, while a SATA 2.0 link caps at 300MB/s and SATA 1.5 at 150MB/s. Actual throughput varies with the host system, cable and software.
SATA 3.0 interface compatibility
This drive requires a SATA 3.0 port and cable to reach its specified interface ceiling of 6.0 Gb/s. It will operate on SATA 2.0 ports at the lower 3.0 Gb/s rate. The single specification that decides fit is the host SATA generation.
Puncte forte
- SATA 3.0 interface delivers up to 600 MB/s sequential throughput
- Backward compatible with SATA 2.0 and 1.5 Gb/s ports
- 5 inch form factor fits desktops, laptops and mini PCs
- 480 GB usable capacity after 0.93 formatting factor
- Drive requires initialisation before first use
Specificații
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Capacity | 480GB |
Alte versiuni ale acestui model
5 în plus din aceeași gamă
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Întrebări despre acest articol
Will the 480GB SATA drive work in a laptop that only has a SATA 2.0 port?
Yes, the drive is backward compatible with SATA 2.0 and will function normally, though maximum transfer speed will be limited to the 300MB/s ceiling of that interface.
How can I confirm the SSD is operating at full SATA 3.0 speed after installation?
Run a benchmark tool such as CrystalDiskMark on an empty drive using a SATA 3.0 cable and port; sequential reads should approach the 600MB/s interface limit.
Does the 2.5 inch 480GB package include a SATA data cable or a mounting bracket for a desktop bay?
The drive is supplied as a bare 2.5 inch unit; a SATA data cable and a 3.5 inch adapter bracket must be purchased separately if your chassis requires them.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
