Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Grey ATX power supply unit with single fan and built-in cables

Replace Power

Replace Power Dell MH495 MK9GY NH493 NK595 P192M PH333 power supply

SKU CH-C9V0-CCMXJ

A compact ATX power supply rated at 280 watts continuous and 420 watts peak, with reduced depth for broad compatibility and an 80 mm fan for quiet cooling

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight4
  • Reduced depth fits tight Dell chassis
  • 280 W continuous power for stable operation
  • 420 W peak capacity handles load spikes
  • Low ripple and noise protects components
  • 24-pin, SATA, Molex and 4-pin CPU connectors included

Replacement Power Supply for Dell Systems

This unit replaces the original power supply in Dell desktops using part numbers MH495 MK9GY NH493 NK595 P192M PH333. It delivers a total continuous output of 280 Watts with a peak rating of 420 Watts. The ATX form factor fits a standard mounting pattern while the reduced depth improves clearance inside compact chassis.

Reduced Depth ATX Design with Fixed Cabling

The grey enclosure measures 5.86 inches by 3.3 inches and uses an 80mm fan for airflow. A single 24-pin connector splits as 20+4 for motherboard compatibility and a 4-pin CPU power lead is included. Three SATA 15-pin connectors, two Molex 4-pin connectors and one floppy 4-pin connector are permanently attached to the unit.

Low Ripple and Noise with Universal AC Input

The power supply accepts 110 or 220 Volts at 47 to 63 Hertz for worldwide mains compatibility. Output rails provide +3.3V, +5V, -5V, +12V1, +12V2, -12V and +5V standby voltages. Hold-up time is at least 17 milliseconds at nominal input and rise time stays below 70 milliseconds. Hi-Pot testing, ROHS and CE marks confirm baseline safety compliance.

Puncte forte

  • Reduced depth fits tight Dell chassis
  • 280 W continuous power for stable operation
  • 420 W peak capacity handles load spikes
  • Low ripple and noise protects components
  • 24-pin, SATA, Molex and 4-pin CPU connectors included

Specificații

BrandReplace Power
ModelDell MH495 MK9GY NH493 NK595 P192M PH333
ColorGrey
TypeATX
Fans1
Weight4

Întrebări despre acest articol

What does the 24 (20+4) pin ATX connector cap in practice?

The 24 (20+4) pin ATX connector supplies the motherboard with +3.3V, +5V, +12V1, +12V2, -12V and +5V-SB rails up to the unit's 280 W total rating.

What clearance does the 5.86" depth need to fit?

The reduced 5.86" depth fits standard ATX bays and leaves extra room behind the tray for cable routing in compact Dell, HP or Compaq chassis.

How is the unit installed and which step is often missed?

Mount the PSU with four screws, plug the 24-pin and 4-pin CPU leads, connect three SATA, two Molex and one floppy drive connector, then switch the 110/220 V selector to match local mains before powering on.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.