Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Grey ATX power supply unit with single fan and multiple cable connectors

Replace Power

Replace Power FSP300-ATXPA-1 300W ATX power supply

SKU CH-9TNC-8CQEM MPN FSP300-ATXPA-1

A 300 W ATX power supply with 24-pin, 4-pin CPU, three SATA and three LP4 connectors for HP 5188-2622 replacement

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Direct replacement for HP 5188-2622 systems
  • ATX reduced depth fits compact cases
  • Single fan cools 300W output quietly
  • 24-pin, 4-pin CPU, three SATA, three LP4, one floppy connectors
  • 110/220V auto-switching with 17ms hold-up time

Replacement PSU for HP 5188-2622

This Replace Power FSP300-ATXPA-1 is a 300W ATX power supply built as a direct replacement for HP part number 5188-2622. It suits owners of compatible HP desktops who need a new power module to restore reliable operation. The grey unit uses a standard ATX form factor with reduced depth for broader chassis compatibility.

Check connectors and chassis depth before ordering

Verify that your system requires a 24-pin ATX connector, a 4-pin P4-12V connector, three SATA 15-pin connectors, three LP4 4-pin connectors and one floppy 4-pin connector. Confirm the power supply fits the reduced depth of 5.86 inches by 3.3 inches inside your case. Ensure the AC input range of 110/220V at 47 to 63 Hz matches your mains supply.

Steady output with low ripple under load

The unit delivers +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails with low ripple and noise. Rise time stays below 70 ms and hold-up time is at least 17 ms at nominal input. Hi-Pot testing confirms insulation integrity for sustained operation. A single fan provides cooling during continuous use.

Puncte forte

  • Direct replacement for HP 5188-2622 systems
  • ATX reduced depth fits compact cases
  • Single fan cools 300W output quietly
  • 24-pin, 4-pin CPU, three SATA, three LP4, one floppy connectors
  • 110/220V auto-switching with 17ms hold-up time

Specificații

BrandReplace Power
ModelFSP300-ATXPA-1
ColorGrey
TypeATX
Fans1
Weight0.1

Întrebări despre acest articol

What connectors come with the FSP300-ATXPA-1 and what else is needed?

The unit includes a 24-pin ATX (20+4) connector, one P4 4-pin, three SATA 15-pin, three LP4 4-pin and one floppy 4-pin. No extra cables are included.

Which capacity version of the Replace Power FSP300-ATXPA-1 should I choose?

Only the 300 W version exists for this model, so no capacity choice is required.

What does the 300 W rating mean once the supply is installed in a real PC?

It delivers up to 300 W across +5 V, -5 V, +12 V1, +12 V2, +3.3 V, -12 V and +5 V standby rails with hold-up time of at least 17 ms at nominal load.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.