Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Replace Power

Replace Power RPSU-5188 420W ATX power supply

SKU CH-24R6-BAQTA MPN RPSU-5188

A 420 W ATX replacement supply with reduced depth, 20+4 pin, 4-pin 12 V, three SATA, two LP4 and one floppy connector, plus full protection circuits

  • TypeATX
  • Fans1
  • Weight1.5
  • 420 W output replaces legacy 250 W and 300 W units
  • 20+4 pin connector supports 20-pin and 24-pin motherboards
  • Compact 5.9" depth fits tight ATX cases
  • Over current, over power, over voltage and short circuit protection
  • 110-260 V AC switchable input works worldwide

Replacement for HP Compaq legacy units

This 420 W ATX power supply replaces several older HP and Compaq units including part numbers 5188-2625, 5188-2626 and 5188-2627. It fits systems that originally shipped with Bestec, Delta, Hipro or eMachine power supplies. The built-in 20+4 pin adapter supports both 20-pin and 24-pin motherboard connectors.

Thermals noise and protection

A single fan cools the unit across an operating range of 0 °C to 50 °C at full load. Over-current, over-power, over-voltage and short-circuit protection circuits are included. The supply accepts 110 V to 260 V AC input at 50 Hz or 60 Hz without manual switching.

420 watt capacity with dual 12 V rails

The +12 V output is split into two rails each rated at 8 A, while +3.3 V delivers 11 A and +5 V delivers 12 A. Connectors provided are one ATX 20+4 pin, one P4 12 V 4-pin, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin. Buyers who need higher 12 V current or additional PCIe power connectors should look elsewhere.

Puncte forte

  • 420 W output replaces legacy 250 W and 300 W units
  • 20+4 pin connector supports 20-pin and 24-pin motherboards
  • Compact 5.9" depth fits tight ATX cases
  • Over current, over power, over voltage and short circuit protection
  • 110-260 V AC switchable input works worldwide

Specificații

BrandReplace Power
ModelRPSU-5188
TypeATX
Fans1
Weight1.5

Întrebări despre acest articol

How do I install the 20+4 pin ATX connector and what step is often missed?

Align the 20+4 pin plug with the motherboard socket, press until the latch clicks, then attach the separate P4 12V 4-pin cable to the CPU power header; the extra 4-pin segment is often left unplugged on 24-pin boards.

What maintenance or replacement will the unit need later?

The single internal fan is the only moving part; clean dust from its intake regularly and replace the fan if bearing noise appears, otherwise the supply has no user-serviceable components.

What limit appears first under sustained full-load operation?

The +12V rails are each rated at 8 A, so the 12 V output hits its current ceiling before the overall 420 W rating is reached.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.