Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Grey ATX power supply unit with single fan, compact rectangular form factor

Replace Power

Replace Power RPSU-C99-19 power supply

SKU CH-W3TF-2GAP6 MPN RPSU-C99-19

ATX power supply with 115/230 V input, SATA connector and 80 mm fan fits HP Pavilion a1419h, a1420, a1423w, a1428x, a1340n, a1440n and a1445n

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for legacy HP Pavilion systems
  • Switchable 115 / 230 V input handles both mains standards
  • Compact 5.9" depth fits tight chassis spaces
  • Over-current, over-power and over-voltage protection safeguards components
  • Single 80 mm fan provides active cooling

Replacement for Legacy HP Systems

This ATX power supply from Replace Power is built as a direct swap for several older HP Pavilion desktops including the a1419h a1420 a1423w a1428x a1340n a1440n and a1445n models. It delivers the standard connectors those systems expect so the machine powers on without adapter cables.

80 mm Fan Cooling and Switchable Input

A single 80 mm fan handles airflow while over current over power and over voltage protection circuits guard the rails. The unit accepts 115 V or 230 V input via a manual switch making it suitable for different mains supplies.

Compact Depth Frees Case Space

At 5.9 inches high and 3.4 inches wide the reduced depth chassis fits tight legacy enclosures where longer units would foul drive cages or motherboard headers. The connector set includes one SATA one 20+4 pin ATX one 12 V ATX two large peripheral plugs and one 6 inch small power lead covering the original wiring loom.

Puncte forte

  • Direct replacement for legacy HP Pavilion systems
  • Switchable 115 / 230 V input handles both mains standards
  • Compact 5.9" depth fits tight chassis spaces
  • Over-current, over-power and over-voltage protection safeguards components
  • Single 80 mm fan provides active cooling

Specificații

BrandReplace Power
ModelRPSU-C99-19
ColorGrey
TypeATX
Fans1
Weight2.5

Întrebări despre acest articol

How do I install the RPSU-C99-19 and which step is often missed?

Mount the unit using the standard ATX screw holes, connect the 20+4 pin ATX, the 12V ATX, one SATA, two large peripheral and one small 6-inch connector, then set the 115/230 V switch to match your mains voltage before powering on.

What maintenance or replacement will the RPSU-C99-19 need later?

The single 80 mm fan is the only moving part; clean dust from its intake every 6–12 months and replace the fan if noise or speed drops appear.

What limit appears first on the RPSU-C99-19 under sustained load?

The 80 mm fan’s airflow capacity is the first bottleneck; prolonged high draw will raise internal temperatures until the over-temperature protection engages.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.