SAMSUNG
SAMSUNG PM1643a 3.84TB SAS 12Gb/s 2.5" internal SSD
A 3.84 TB SAS 12 Gb/s 2.5-inch internal SSD with enhanced power-loss data protection and TCG-compliant optional self-encryption
- Device TypeInternal Solid State Drive (SSD)
- SAS 12 Gb/s interface speeds up data transfer
- Enhanced power-loss protection with aluminum electrolytic capacitors safeguards data
- Optional TCG-compliant self-encryption secures sensitive information
- End-to-end data protection maintains integrity across the data path
- Supports 32 initiators with TCQ up to 256 queue depth for heavy workloads
Samsung PM1643a 3.84TB Enterprise SSD
The Samsung PM1643a is a 3.84TB internal solid-state drive built for enterprise servers and storage arrays. It uses a SAS 12 Gb/s interface and 3D TLC NAND to deliver consistent performance for mission-critical workloads. Enhanced power-loss protection with aluminum electrolytic capacitors helps safeguard data during unexpected outages. Optional TCG-compliant self-encryption and end-to-end data protection address strict security requirements.
Suited for virtual desktops web servers
This drive targets IT managers running virtual desktop infrastructures, web servers, email servers, ERP systems and relational databases where reliability and sequential throughput matter. The SAS 12 Gb/s interface supports 32 initiators with TCQ command sets up to 256 queue depth for heavy multi-workload environments. Workloads requiring a different physical interface or protocol should evaluate alternative drive types. The optional TCG Enterprise Specification Rev. 1.01 compliance fits regulated deployments.
SAS 12 Gb/s interface with 256 queue depth
The single specification that decides fit is the SAS 12 Gb/s interface combined with support for 32 initiators and TCQ command sets up to 256 queue depth. This determines whether the drive integrates with existing host bus adapters, backplanes and controller firmware in the target server or array. Compliance with SAS-3, SPL-3, SBC-4, SPC-5 and SAM-5 specifications ensures broad enterprise ecosystem compatibility. Verify the storage controller supports these standards before purchase.
Puncte forte
- SAS 12 Gb/s interface speeds up data transfer
- Enhanced power-loss protection with aluminum electrolytic capacitors safeguards data
- Optional TCG-compliant self-encryption secures sensitive information
- End-to-end data protection maintains integrity across the data path
- Supports 32 initiators with TCQ up to 256 queue depth for heavy workloads
Specificații
| Device Type | Internal Solid State Drive (SSD) |
|---|
Întrebări despre acest articol
What host interface and port speed must the server provide for this 12 Gb/s SAS drive?
The server needs a SAS 12 Gb/s host port; the drive uses the SAS-3 interface and will negotiate down to 6 Gb/s if the backplane only supports that speed.
Will the 2.5-inch form factor fit in the same drive bays as my existing 2.5-inch SAS HDDs?
Yes, it shares the standard 2.5-inch SAS form factor and connector, so it drops into the same hot-swap bays and backplanes used by 2.5-inch enterprise HDDs.
How can I confirm the drive’s end-to-end data protection and TCQ depth are active after installation?
Check the drive’s SCSI VPD pages: the Protection Information field should report Type 1 or 2 enabled, and the TCQ depth should show up to 256 commands per initiator.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
