Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch SCSI hard drive with 80 pin connector

Seagate

Seagate Barracuda 18XL ST39236LC 9.2GB 7200RPM 80Pin 1MB 3.5" SCSI internal hard drive

SKU CH-3S6K-C9WBN

Stores 9.2 GB on a 7200 RPM 3.5-inch SCSI drive with an 80-pin connector and 1 MB cache

  • 2 GB capacity stores large datasets
  • 7200 RPM spindle speed reduces access latency
  • 16-bit SCSI-3 Ultra Wide interface moves data quickly
  • 80-pin connector fits standard wide SCSI backplanes
  • 5 inch form factor mounts in desktop drive bays

Seagate Barracuda 18XL 9.2GB SCSI Drive

The Seagate Barracuda 18XL ST39236LC is a 9.2GB internal hard drive built for legacy desktop systems. It spins at 7200RPM and connects through an 80-pin SCSI-3 Ultra Wide 16-bit interface. The drive uses a 3.5-inch form factor and includes a 1MB buffer. It is supplied in new condition.

Suits SCSI-3 Ultra Wide 16-bit systems only

This drive fits computers and controllers that support the 80-pin SCSI-3 Ultra Wide 16-bit interface. It is not for systems requiring higher capacity, different interface types, or solid state storage. Buyers needing larger storage volumes or modern connection standards should consider other options.

80-pin SCSI-3 Ultra Wide 16-bit interface

The single specification that decides compatibility is the 80-pin SCSI-3 Ultra Wide 16-bit interface. The host system must provide this exact connection for the drive to function. Without a matching SCSI controller or backplane, the drive cannot be installed or used.

Puncte forte

  • 2 GB capacity stores large datasets
  • 7200 RPM spindle speed reduces access latency
  • 16-bit SCSI-3 Ultra Wide interface moves data quickly
  • 80-pin connector fits standard wide SCSI backplanes
  • 5 inch form factor mounts in desktop drive bays

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What drive bay and connector does the 3.5" 80-pin SCSI drive require?

It fits a standard 3.5-inch internal bay and plugs directly into an 80-pin SCSI-3 Ultra Wide backplane or adapter.

How is the SCSI ID set on the ST39236LC during installation?

The 80-pin SCA connector carries the ID signals, so the drive takes its SCSI address from the backplane jumpers or enclosure slot — no jumpers on the drive itself.

When should the 9.2 GB 7200 RPM mechanism be replaced in a legacy array?

Replace it when SMART reallocated-sector counts rise, seek errors appear in logs, or the drive exceeds the original 1-year warranty period in continuous operation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.