Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5-inch enterprise hard drive, bare circuit board visible, SAS connector on rear edge

Seagate

Seagate Exos X16 16TB SAS 12Gb/s 7200 RPM 256MB 3.5" ST16000NM002G internal hard drive

SKU CH-J3P6-2143H MPN ST16000NM002G

Enterprise SAS hard drive with 16 TB capacity, 7200 RPM speed and 256 MB cache for high-density storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity16TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache256MB
  • 16TB capacity stores 33% more data per rack than 12TB drives
  • 7200 RPM with 256MB cache delivers highest 16TB hard drive performance
  • 12Gb/s SAS interface enables fast data transfer for enterprise workloads
  • 5M-hour MTBF rating supports reliable continuous operation in data centers
  • 512e/4Kn FastFormat provides flexible sector formatting for modern storage arrays

Enterprise Capacity Upgrade

The Seagate Exos X16 ST16000NM002G is a 16TB 3.5 inch internal hard drive built for enterprise storage arrays. It runs at 7200 RPM with a 256MB cache and connects through a SAS 12Gb/s interface. The drive uses 512e/4Kn FastFormat sectors and carries a 2.5M hour MTBF rating for continuous operation.

Replacing Lower Density Drives

This model delivers 33% more petabytes per rack compared to 12TB competitive products, letting operators consolidate capacity without adding shelves. The jump is worth it when rack space, power budget or drive-count limits are the primary constraints. Average latency sits at 4.16ms under sustained workloads.

Standard 3.5 Inch SAS Installation

The bare drive fits standard 3.5 inch bays measuring 147.00mm long, 101.85mm wide and 26.11mm high, using the regular SAS power and data connectors. Installers must verify the backplane or HBA supports 12Gb/s SAS and the correct sector format for the array controller. No special mounting hardware or cabling is included in the bare drive package.

Puncte forte

  • 16TB capacity stores 33% more data per rack than 12TB drives
  • 7200 RPM with 256MB cache delivers highest 16TB hard drive performance
  • 12Gb/s SAS interface enables fast data transfer for enterprise workloads
  • 5M-hour MTBF rating supports reliable continuous operation in data centers
  • 512e/4Kn FastFormat provides flexible sector formatting for modern storage arrays

Specificații

BrandSeagate
SeriesExos X16
ModelST16000NM002G
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity16TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesIndustry's first 16TB drive for 33% more petabytes per rack*
* Compared to 12TB competitive product
Highest 16TB hard drive performance with enhanced caching, making it perfect for cloud data center and massive scale-out data center applications
Hyperscale SATA model tuned for large data transfers and low latency
PowerBalance feature optimizes Watts/TB
Helium sealed-drive design delivers lower total cost of ownership through lower power and weight
Next-generation helium side-sealing weld technology for added handling robustness and leak protection
Digital environmental sensors to mon
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Greutate la expediere0.67 kg
Dimensiunile coletului145 × 117 × 25 mm

Întrebări despre acest articol

What 3.5-inch drive bay dimensions does the ST16000NM002G require for mounting?

The drive fits a standard 3.5-inch bay with maximum dimensions of 147.00mm length, 101.85mm width and 26.11mm height.

How do I connect the SAS 12Gb/s interface correctly, and what cabling step is often missed?

Attach a SAS 12Gb/s cable to the drive's SAS port and the controller; the step often missed is ensuring the controller also supports 12Gb/s speeds for full performance.

When should I plan to replace this enterprise drive based on its rated reliability?

The drive carries a 2.5M-hour MTBF rating; plan replacement schedules around that endurance figure and your workload intensity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.