Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
3.5 inch SAS hard drive with caddy tray

Seagate

Seagate HUS156060VLS600 600GB 15000RPM SAS 3.5in internal hard drive

SKU CH-8MCA-1SF44

A 600GB, 15000RPM SAS hard drive with 64MB cache for 3.5in server bays

  • 15000 RPM spindle speed enables rapid data access for transaction-heavy workloads
  • 600 GB capacity stores large datasets in a single 3.5 inch drive
  • 64 MB cache buffers bursts to sustain throughput under load
  • SAS 6 Gb/s interface connects directly to enterprise controllers
  • Includes SYSTEM STORAGE caddy for tool-less installation in compatible bays

600GB 15000RPM SAS Enterprise Drive

This 3.5in internal hard drive delivers 600GB of storage on a 6Gb/s SAS interface spinning at 15000RPM. It is built for IBM System Storage servers and arrays that require high transactional throughput and low latency. The 64MB buffer helps smooth burst workloads in multi-drive configurations. Supplied new with the original SYSTEM STORAGE caddy for hot-swap bays.

Suits transaction-heavy server workloads

This drive suits administrators populating or refreshing SAS hot-swap bays in enterprise storage enclosures where 15000RPM spindle speed and dual-port SAS connectivity are mandated. It is not for buyers who need larger capacity per spindle, silent desktop operation or an interface other than SAS for consumer motherboards. Workstations without a hardware SAS controller cannot use this drive.

6Gb/s SAS interface decides fit

The single specification that decides compatibility is the 3.5in SAS 6Gb/s interface. Your backplane or controller must support this exact signalling rate and physical connector. Capacity, rotational speed and cache size are secondary once the interface matches. Verify the part numbers 49Y1866, 49Y1869 and 49Y1870 against your hardware compatibility list before purchase.

Puncte forte

  • 15000 RPM spindle speed enables rapid data access for transaction-heavy workloads
  • 600 GB capacity stores large datasets in a single 3.5 inch drive
  • 64 MB cache buffers bursts to sustain throughput under load
  • SAS 6 Gb/s interface connects directly to enterprise controllers
  • Includes SYSTEM STORAGE caddy for tool-less installation in compatible bays

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Does this 600 GB drive require a 3.5-inch SAS hot-swap bay and a 6 Gb/s SAS host adapter to operate?

Yes, the 3.5-inch form factor and SAS 6Gb/s interface mean you need a compatible LFF hot-swap bay and a 6 Gb/s SAS controller or backplane.

Will the 64 MB cache and 15000 RPM spindle work with an older 3 Gb/s SAS controller?

The drive negotiates down to 3 Gb/s, so it will function on a 3 Gb/s SAS controller, though maximum throughput will be limited to that speed.

How can I confirm the drive is healthy after installation?

Check that the system BIOS or RAID utility detects the HUS156060VLS600 at 600 GB, run a SMART short self-test and verify zero reallocated sectors.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.