Seagate
Seagate Nytro 1361 480 GB 2.5" SATA internal SSD
A 480 GB 2.5" SATA internal SSD built with 3D eTLC for 24x7 enterprise workloads, rated at 1 DWPD and 865 TB endurance
- Device TypeInternal Solid State Drive (SSD)
- Enterprise-grade 3D eTLC NAND for 24x7 reliability
- 480 GB capacity with 1 DWPD and 865 TB endurance
- Sequential speeds up to 530 MBps read and 450 MBps write
- Random performance of 94000 read IOPS and 37000 write IOPS
- Low power draw of 1.5 W idle and 3.5 W average
Capacity & Interface
The Seagate Nytro 1361 is a 480 GB internal solid-state drive with a 2.5 inch form factor and a SATA 6Gb/s interface. It uses 3D enterprise triple-level cell (eTLC) NAND and is rated for 24x7 continuous operation with a DWPD of 1.
Enterprise workloads vs lighter use
This drive suits servers and storage arrays that need consistent read speeds of 530 MBps and write speeds of 450 MBps under sustained loads. It is less suited for desktop users who only need occasional boot or game storage and do not require the 865 TB endurance rating.
Endurance & reliability metric
The 865 TB total bytes written figure and 2,000,000 hour MTBF are the key specifications that determine whether this SSD meets a given write-intensive workload. Buyers should compare their daily write volume against this endurance ceiling before purchasing.
Puncte forte
- Enterprise-grade 3D eTLC NAND for 24x7 reliability
- 480 GB capacity with 1 DWPD and 865 TB endurance
- Sequential speeds up to 530 MBps read and 450 MBps write
- Random performance of 94000 read IOPS and 37000 write IOPS
- Low power draw of 1.5 W idle and 3.5 W average
Specificații
| Device Type | Internal Solid State Drive (SSD) |
|---|
Întrebări despre acest articol
Will this 2.5" SATA drive fit in my laptop or server bay?
The drive uses the standard 2.5" form factor and a single SATA 6 Gb/s connector, so it fits any 2.5" SATA bay in laptops, servers or storage arrays.
What workloads can the 1 DWPD endurance rating actually handle?
At 1 DWPD the drive is warranted for 865 TB of total writes, which covers typical mixed read-write workloads such as web hosting, logging or virtualisation boot volumes.
How much power should I budget for this SSD in a 24/7 server?
Average power draw is 3.5 W during operation and 1.5 W at idle, so a standard SATA power connector supplies ample headroom for continuous use.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
