Seagate
Seagate ST31500341AS Barracuda 7200.11 1.5TB 7200RPM 32MB 3.5" SATA internal hard drive
A 1.5 TB desktop hard drive spins at 7200 RPM with a 32 MB cache on a 3.5" SATA interface
- 5 TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers quick data access for everyday computing
- 32 MB cache buffers frequent read and write operations
- SATA 3 Gb/s interface connects to standard desktop motherboards
- New condition with zero hours ensures full service life from first use
1.5 TB SATA desktop drive
This is a new 1.5 TB 3.5-inch internal hard drive spinning at 7200 RPM with a 32 MB cache. It connects through a SATA 3 Gb/s interface and is built for standard desktop bays. The unit arrives with zero hours on the motor.
Suits bulk storage on older PCs
Builders expanding a legacy desktop or replacing a failed drive in a system that only offers SATA 3 Gb/s ports will find the capacity and spindle speed a direct match. Systems requiring 6 Gb/s throughput or a 2.5-inch form factor should look at other options.
SATA 3 Gb/s interface
The drive communicates over a SATA 3 Gb/s link, so the host controller must provide that exact interface. If the motherboard or backplane only supports a different signalling rate, the drive will not operate at its rated speed.
Puncte forte
- 5 TB capacity stores large media libraries and backups
- 7200 RPM spindle speed delivers quick data access for everyday computing
- 32 MB cache buffers frequent read and write operations
- SATA 3 Gb/s interface connects to standard desktop motherboards
- New condition with zero hours ensures full service life from first use
Specificații
Nicio specificație publicată pentru acest articol deocamdată.
Întrebări despre acest articol
How much power and heat does the 7200RPM 1.5TB Barracuda produce when running continuously?
The 3.5" 7200RPM mechanism draws typical desktop HDD power and emits moderate heat; ensure your case has airflow over the drive bay for all-day operation.
What cables and host interface does the ST31500341AS need to work?
It requires a SATA 3Gb/s data cable and a standard SATA power connector from your power supply, plus a free 3.5" drive bay or mounting bracket in the chassis.
Will this 3Gb/s SATA drive work reliably on an older motherboard that only supports 1.5Gb/s SATA?
Yes, the SATA interface is backward compatible; the drive will negotiate 1.5Gb/s on older controllers while delivering its full 1.5TB capacity and 32MB cache.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



