Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver rectangular 3.5 inch bare hard drive with green circuit board visible

Seagate

Seagate ST3300622A 300GB 7200 RPM 16MB IDE 3.5" internal hard drive

SKU CH-FQVK-JMV21 MPN ST3300622A

A 300 GB 3.5" desktop drive with 7200 RPM and 16 MB cache on IDE Ultra ATA100 interface

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA100 / ATA-6
  • Capacity300GB
  • RPM7200 RPM
  • Cache16MB
  • Average Latency4.16ms
  • 300 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers fast data access
  • 16 MB cache reduces read latency
  • IDE Ultra ATA100 interface fits legacy systems
  • 350 Gs non-operating shock protects stored data

Seagate BarraCuda 7200.9 300GB IDE drive

This new Seagate ST3300622A is a 300GB 3.5-inch internal hard drive built for desktop PCs that still use the IDE Ultra ATA100 / ATA-6 interface. It spins at 7200 RPM with a 16MB cache and delivers 4.16ms average latency for general storage tasks.

Suits legacy IDE desktops only

Buyers maintaining or repairing older computers with an available IDE Ultra ATA100 / ATA-6 connector will find the correct form factor and interface here. Systems that require a different drive interface cannot use this unit, and anyone needing more than 300GB of capacity should consider other options.

IDE Ultra ATA100 / ATA-6 interface

The single specification that determines compatibility is the IDE Ultra ATA100 / ATA-6 interface; the motherboard or controller must provide this exact connection for the drive to function.

Puncte forte

  • 300 GB capacity stores large media libraries
  • 7200 RPM spindle speed delivers fast data access
  • 16 MB cache reduces read latency
  • IDE Ultra ATA100 interface fits legacy systems
  • 350 Gs non-operating shock protects stored data

Specificații

BrandSeagate
SeriesBarraCuda 7200.9
ModelST3300622A
PackagingBare Drive
InterfaceIDE Ultra ATA100 / ATA-6
Capacity300GB
RPM7200 RPM
Cache16MB
Average Latency4.16ms
FeaturesRoHS compliant
350 Gs non-operating shock
3-D Defense System
63 Gs operating shock
Form Factor3.5"
Greutate la expediere0.68 kg
Dimensiunile coletului203 × 152 × 51 mm

Întrebări despre acest articol

How do I install the ST3300622A and set the master or slave jumper correctly?

Connect the 40-pin IDE cable to the drive and motherboard, attach a 4-pin Molex power connector, then set the jumper block on the rear to Master for a single drive or Slave if sharing the cable; the drive is a bare 3.5" unit so it mounts in a standard bay with four screws.

What maintenance or replacement will the BarraCuda 7200.9 need over time?

No scheduled maintenance is required; the 16MB cache and mechanical parts are sealed, so the only future action is replacing the drive if SMART attributes report reallocated sectors or if the 63 Gs operating shock limit is exceeded.

What is the first limit reached during sustained heavy writes on this 300GB model?

The IDE Ultra ATA100 interface caps sustained throughput at 100 MB/s, so the bus saturates before the 7200 RPM platters or 4.16ms average latency become the bottleneck.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.