Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5 inch bare SATA hard drive with exposed circuit board

Seagate

Seagate ST380215AS 80 GB 7200 RPM 2 MB SATA 3.0 Gb/s 3.5" internal hard drive

SKU CH-RZ4A-8JB0C MPN ST380215AS

An 80 GB 3.5" desktop drive with 7200 RPM, 2 MB cache and SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity80GB
  • RPM7200 RPM
  • Cache2MB
  • Average Latency4.16ms
  • 7200 RPM spindle speed enables responsive desktop performance
  • 80 GB capacity provides storage for operating system and applications
  • SATA 3.0 Gb/s interface connects directly to standard motherboard ports
  • Perpendicular recording technology increases areal density for reliable data retention
  • 2 MB cache buffers bursts for smoother read and write operations

Capacity and interface

This is a new 80 GB 3.5-inch internal hard drive with a SATA 3.0 Gb/s interface. It suits desktop builds that need a small amount of storage for an operating system or legacy applications. The bare-drive packaging means no cables or brackets are included.

Sustained throughput and latency

The drive spins at 7200 RPM with a 2 MB cache and delivers a maximum sustained data transfer rate of 78 MB/s. Average latency is 4.16 ms. Perpendicular recording technology supports capacity and reliability during continuous operation.

Compatibility checks

Verify that your motherboard or controller provides a free SATA 3.0 Gb/s port and that the power supply has an available SATA power connector. Ensure the chassis has a 3.5-inch drive bay with mounting points for a bare drive.

Puncte forte

  • 7200 RPM spindle speed enables responsive desktop performance
  • 80 GB capacity provides storage for operating system and applications
  • SATA 3.0 Gb/s interface connects directly to standard motherboard ports
  • Perpendicular recording technology increases areal density for reliable data retention
  • 2 MB cache buffers bursts for smoother read and write operations

Specificații

BrandSeagate
SeriesBarraCuda 7200.10
ModelST380215AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity80GB
RPM7200 RPM
Cache2MB
Average Latency4.16ms
FeaturesPerpendicular recording technology for maximum drive capacity and reliability
Ultra-fast performance
Superb reliability
Whisper-quiet operation
Enhanced G-Force Protection against handling damage
78 MB/s maximum sustained data transfer rate
Clean Sweep calibration and Directed Offline scan diagnostics
RoHS (restriction of hazardous substances) compliant
Form Factor3.5"
Greutate la expediere0.91 kg
Dimensiunile coletului152 × 102 × 19 mm

Întrebări despre acest articol

How much power and heat does the 7200 RPM BarraCuda 7200.10 generate during all-day operation?

The drive uses perpendicular recording technology and Enhanced G-Force Protection for reliable operation, with whisper-quiet acoustics and a 4.16 ms average latency at 7200 RPM.

What cables or host interface must I already have to install this ST380215AS?

It requires a SATA 3.0 Gb/s data cable and a standard SATA power connector from the system power supply.

Will this 80 GB SATA 3.0 Gb/s drive work alongside an older IDE hard drive in the same PC?

Yes, it connects via SATA 3.0 Gb/s while an IDE drive uses a separate PATA interface, so both can coexist on a motherboard that provides both connectors.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.