Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 3.5-inch SAS hard drive bare circuit board visible

Seagate

Seagate ST4000NM0025 4TB 7200 RPM SAS 12Gb/s 128MB 3.5" internal hard drive

SKU CH-36R1-8YBFE MPN ST4000NM0025

4 TB SAS 12 Gb/s enterprise hard drive with 7200 RPM, 128 MB cache and CMR technology for 24×7 bulk-data workloads

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Cache128MB
  • Average Latency4.16ms

Options 4TB

  • 4TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 12Gb/s SAS interface enables high-speed data transfer
  • 128MB cache buffers bursts for smooth performance
  • Engineered for 24x7 workloads up to 550TB per year

Enterprise Capacity Drive

The Seagate ST4000NM0025 is a 4TB 3.5-inch internal hard drive built for enterprise storage servers and arrays. It uses conventional magnetic recording technology and a SAS 12Gb/s interface to deliver consistent performance in 24x7 bulk-data workloads.

Installation and Common Issues

The bare drive mounts in a standard 3.5-inch bay and connects via SAS data and power cables to a compatible controller or backplane. Installation fails when the host system lacks a SAS HBA or RAID card, as the drive will not operate on a standard SATA-only motherboard port.

Pre-Order Checks

Verify that your server or storage enclosure supports 12Gb/s SAS connectivity and provides the correct power connector for enterprise drives. Confirm the chassis can accommodate a 26.10mm drive height and that your RAID controller or HBA firmware is current for 4TB capacity recognition.

Puncte forte

  • 4TB capacity stores large enterprise datasets
  • 7200 RPM spindle delivers fast sequential throughput
  • 12Gb/s SAS interface enables high-speed data transfer
  • 128MB cache buffers bursts for smooth performance
  • Engineered for 24x7 workloads up to 550TB per year

Specificații

BrandSeagate
SeriesEnterprise Capacity 3.5
ModelST4000NM0025
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity4TB
RPM7200 RPM
Cache128MB
Average Latency4.16ms
FeaturesCapacity-Optimized Enterprise Hard Drive for Bulk-Data Applications
- 1TB to 8TB*1, 3.5-inch enterprise drive with industry-leading conventional magnetic recording (CMR) technology
- Advanced Write Caching feature enables up to 100% performance improvement in random writes over last-generation drive
- 12Gb/s SAS and SATA 6Gb/s interfaces in industry-standard formats (512n, 512e and 4Kn) for easy integration into replicated and RAID multi-drive storage servers and systems
- State-of-the-art cache, on-the-fly error-correction algorithms, super parity and end-to-end SAS-based data integ
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Greutate la expediere0.69 kg
Dimensiunile coletului156 × 135 × 3 mm

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How can I confirm the ST4000NM0025 is performing correctly after installation?

Check that the BIOS or RAID controller detects a 4000 GB SAS drive at 12 Gb/s, verify SMART data shows zero reallocated sectors, and run a full surface scan that completes without errors.

The listing says Packaging: Bare Drive — what does that include and what must I supply?

You receive only the 3.5-inch drive itself; you must provide a SAS 12 Gb/s cable, a compatible backplane or HBA, mounting screws, and a 12 V / 5 V power connector.

Which interface version should I choose for a 12 Gb/s SAS backplane?

Select the SAS 12 Gb/s model (ST4000NM0025) — it matches the backplane speed and uses the 512n sector format for direct compatibility.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.