Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green PCB expansion card with eight SFF-8643 connectors and a PCIe x16 edge connector

Shenzhen Lianrui Information Technology

Shenzhen Lianrui Information Technology LRNV9349-8I expansion card

SKU CH-KD9M-8VVH0

Connects eight NVMe SSDs through a PCIe 3.0 x16 slot using PLX 8749 switching with 126 ns latency

  • TypeController Card
  • Internal Ports8 Port SFF-8643
  • StandardPCI Express x16 to 8 U.2 SFF-8643 NVMe SSD Adapter Card
  • Data Transfer Rate6.0 Gbps
  • Weight0.33lb
  • Add eight NVMe drives with one x16 slot
  • PLX 8749 switch handles eight SFF-8643 ports
  • PCIe 3.0 x16 host delivers 6.0 Gbps throughput
  • 126 ns cut-through latency keeps queues short
  • Supports 2048-byte payloads for sustained transfer

Multi-Host PCIe Switch Card

The LRNV9349-8I is a PCI Express x16 Gen 3 multi-host switch card built around the PLX 8749 chipset. It provides eight internal SFF-8643 connectors for attaching up to eight NVMe SSDs or PCIe adapter cards. The card delivers a data transfer rate of 6.0 Gbps and weighs 0.33 lb.

Suits multi-host storage clusters.

This card targets servers, storage arrays, communications gear and graphics platforms that need scalable, non-blocking interconnects between multiple hosts and endpoints. It is not intended for builders who only need a single NVMe drive on a desktop motherboard, nor for systems lacking a full x16 Gen 3 slot.

Occupies one x16 Gen 3 slot to fan out eight U.2

The adapter consumes a single PCIe 3.0 x16 lane and breaks it out to eight SFF-8643 ports, freeing additional expansion slots that would otherwise be needed for individual controllers. Its cut-through switching achieves 126 ns maximum latency with 2048-byte packet payloads, enabling full line-rate performance across all connected endpoints.

Puncte forte

  • Add eight NVMe drives with one x16 slot
  • PLX 8749 switch handles eight SFF-8643 ports
  • PCIe 3.0 x16 host delivers 6.0 Gbps throughput
  • 126 ns cut-through latency keeps queues short
  • Supports 2048-byte payloads for sustained transfer

Specificații

BrandLinkreal
SeriesPCI Express x16 to 8 U.2 SFF-8643 NVMe SSD Adapter Card
ModelLRNV9349-8I
TypeController Card
Internal Ports8 Port SFF-8643
StandardPCI Express x16 to 8 U.2 SFF-8643 NVMe SSD Adapter Card
Data Transfer Rate6.0 Gbps
Weight0.33lb

Întrebări despre acest articol

Which motherboard slot is required for the LRNV9349-8I to operate at PCIe 3.0 x16?

The card needs a physical PCIe x16 slot wired for Gen 3.0 to deliver its full host-bus bandwidth.

Can the eight SFF-8643 ports drive NVMe SSDs while the rest of the system runs on PCIe 2.0 lanes?

Yes — the PLX 8749 switch negotiates per-port speed, so each NVMe SSD will run at the highest rate its own link supports.

How can I verify the adapter is delivering the 126 ns cut-through latency after installation?

Run a PCIe latency test tool that measures round-trip time across the switch; a result near 126 ns confirms the PLX 8749 is operating in cut-through mode.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.