Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square case fan sixty by sixty by twenty five millimetres three wire connector

SunnyStar Co., Ltd

SunnyStar Co., Ltd FD246025HB 60x60x25mm 24V 0.09A 25.4CFM 3-Wire Case Fan

SKU CH-RT6W-2ZSZS

A 60 mm ball-bearing case fan runs on 24 V and moves 25.4 CFM for inverter cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • 24 V operation suits industrial inverter systems
  • Ball bearing design extends service life
  • 4 CFM airflow cools compact enclosures
  • 60×60×25 mm frame fits standard 6025 mounts
  • Three-wire connector enables speed monitoring

Compact 24 V 60 mm Fan

The FD246025HB is a 60 mm square DC case fan rated for 24 V operation. It targets builders or technicians who need a small form-factor cooler for inverter chassis or tight industrial enclosures.

Straightforward Three-Wire Mount

The unit uses a standard three-wire power connector and ball-bearing construction for simple installation. Polarity must be observed on the 24 V supply; the lack of a fourth PWM wire means speed control is not supported.

25.4 CFM Airflow at 0.09 A

At 25.4 CFM the fan delivers modest airflow suitable for low-heat components or auxiliary ventilation. It reaches its limit quickly in high-density GPU or CPU coolers where static pressure and volume demands are higher.

Puncte forte

  • 24 V operation suits industrial inverter systems
  • Ball bearing design extends service life
  • 4 CFM airflow cools compact enclosures
  • 60×60×25 mm frame fits standard 6025 mounts
  • Three-wire connector enables speed monitoring

Specificații

SeriesFD246025HB
ModelFD246025HB
TypeCase Fan
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*25mm

Întrebări despre acest articol

How can I confirm the 24V 0.09A FD246025HB is spinning correctly after installation?

The 3-wire connector provides a tachometer signal so the system BIOS or fan-control software can report live RPM; verify that the reported speed is stable and matches the 25.4 CFM airflow rating.

What comes with the FD246025HB and what must I source separately?

The package contains the 60×60×25 mm black ball-bearing fan with a 3-wire lead; mounting screws, fan filters or a PWM controller are not included and must be purchased separately.

Which version of the 6025 series should I choose for a 24 V inverter application?

Select the FD246025HB model rated at 24 V, 0.09 A and 25.4 CFM; it is the only variant in this series specified for 24 V inverter use.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.