Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Square 140 mm black frame fan with 25 mm depth and four-wire PWM connector

SXD

SXD HA1425M12SB-Z 140×25 mm 12 V 0.36 A 2236 RPM 68 CFM 29 dBA case fan

SKU CH-B5DN-QKZ4M MPN HA1425M12SB-Z

A 140 mm PWM case fan delivering 68 CFM at 2236 RPM with a 29 dBA noise level

  • PWM control enables precise speed adjustment via four-wire connection
  • 68 CFM airflow delivers strong cooling for server chassis
  • 29 dBA operation keeps acoustic output low under load
  • 140 × 25 mm frame fits standard large-fan mounting points
  • 12 V 0.36 A draw balances performance with modest power use

140 mm PWM case fan for servers

This 140 mm fan runs on 12 V and draws 0.36 A through a four-wire PWM connection. It spins at 2236 RPM to deliver 68 CFM of airflow at a rated 29 dBA. The 25 mm thick frame fits standard 140 mm mounting points in server and workstation chassis. It is built for continuous operation in rack environments.

Four-wire PWM control

The PWM lead lets the motherboard or fan controller vary speed automatically based on temperature sensors. This reduces acoustic output when thermal load is low while still providing full 68 CFM when demanded. No separate fan controller or voltage adapter is required for speed regulation.

12 V PWM interface limits

Speed range and minimum RPM are defined by the PWM implementation on the host board, not by the fan alone. The 0.36 A current draw must be supported by the fan header or splitter used. Builders needing higher static pressure or lower noise at equivalent airflow should evaluate alternative models.

Puncte forte

  • PWM control enables precise speed adjustment via four-wire connection
  • 68 CFM airflow delivers strong cooling for server chassis
  • 29 dBA operation keeps acoustic output low under load
  • 140 × 25 mm frame fits standard large-fan mounting points
  • 12 V 0.36 A draw balances performance with modest power use

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

How often should I clean the 140 mm blades to keep the 2236 RPM speed stable?

Dust the blades and frame every few months with compressed air; buildup reduces airflow below the rated 68 CFM and forces the motor to run hotter.

Which limit appears first when the fan runs at full 2236 RPM for hours?

The 29 dBA noise floor becomes noticeable before thermal limits; the 0.36 A draw stays within the 12 V header rating during continuous operation.

What noise and heat should I expect from the 12 V 0.36 A motor during all-day use?

Expect a steady 29 dBA hum and warm — not hot — frame temperature; the four-wire PWM connection lets the motherboard lower speed when full 68 CFM isn’t needed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.