Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Eight square black 120 mm fans with transparent blades and a small remote control

SXDOOL

SXDOOL 8×120 mm RGB case fan set with remote

SKU CH-RD27-RPFEY

Eight 120 mm hydraulic-bearing fans with RGB lighting and a remote for speed and colour control, running at 600-1200 RPM with 20.34 CFM airflow and 28 dBA noise

  • TypeCase Fan
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Air Flow20-25 CFM
  • Noise Level25 - 30 dBA
  • LEDRGB
  • Quiet operation at 28 dBA with hydraulic bearing
  • RGB lighting adjustable via included remote controller
  • PWM speed control from 600 to 1200 RPM
  • 34 CFM airflow for effective case cooling
  • 40000-hour bearing lifetime for long-term reliability

Eight-fan RGB kit with remote control

This set supplies eight 120 mm hydraulic-bearing case fans and a single remote controller. The fans run on 12 V and draw 0.23 A each at full speed. RGB LEDs are powered separately from a 5 V source. The kit suits builders who want coordinated lighting and speed control across multiple intake or exhaust positions.

PWM speed limited by mini 6-pin connector

Each fan uses a proprietary mini 6-pin connector that carries both the 12 V power and the PWM signal. The remote can adjust speed between 600 and 1 200 RPM, but the connector prevents direct motherboard PWM control. Builders who rely on BIOS fan curves or software monitoring cannot use those features with this kit.

Hydraulic bearing rated for 40 000 hours

The hydraulic bearing is specified for 40 000 hours of continuous operation at the rated current of 0.19 A. This figure determines whether the fans meet a build’s expected service life. Buyers who need a longer-rated bearing or a standard 4-pin PWM interface should look elsewhere.

Puncte forte

  • Quiet operation at 28 dBA with hydraulic bearing
  • RGB lighting adjustable via included remote controller
  • PWM speed control from 600 to 1200 RPM
  • 34 CFM airflow for effective case cooling
  • 40000-hour bearing lifetime for long-term reliability

Specificații

TypeCase Fan
Bearing TypeHydraulic
RPM<1600 RPM
Air Flow20-25 CFM
Noise Level25 - 30 dBA
LEDRGB

Întrebări despre acest articol

How many fans come in this set and what control options are included?

The set includes eight 120 mm RGB case fans and a remote controller that adjusts both fan speed and LED colours.

What airflow and noise can I expect once the fans are installed in a case?

Each fan delivers 20.34 CFM at 600–1200 RPM and runs at 28 dBA, so the set provides steady airflow with low audible noise.

What connector does the fan use and what voltage does it require?

The fans connect via a mini 6-pin connector and operate on 12 V DC for the motor and 5 V DC for the RGB lighting.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.