Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Ten black filament spools in a pack, 2.85mm diameter

Taulman 3D

Taulman 3D t-glase Filament 2.85mm Black 10 pack 3d printers accessory

SKU CH-KWQN-DGBXP

Ten 1 lb spools of 2.85 mm PET co-polymer filament for food-safe, high-strength prints with very low shrinkage

  • ColorBlack
  • TypeFilament
  • Polymer rated for direct food contact and containers
  • 10 spools of 2.85 mm filament in one case
  • Very low shrinkage eases printing on large flat surfaces
  • High-strength PET co-polymer stronger than ABS
  • Prints at 235-245 °C on unheated beds

Filament pack for food-safe prints

This pack contains ten spools of Taulman 3D t-glase filament, each weighing 1lb and measuring 2.85mm in diameter. The polymer is made for direct food contact, making it suitable for containers and kitchen items. It offers high strength, exceeding ABS, and very low shrinkage for large flat surfaces. The black colour provides a consistent finish for functional parts.

Printing temperature and speed limits

The filament prints at 235-245C and requires slower speeds than standard beginner filaments like ABS and PLA. It adheres well to acrylic, glass, Kapton, or other large flat platforms, even on printers without a heated bed. Optical coatings can give the material a glass-like clarity, though the black spools in this pack are opaque. Every roll is 100% made in the United States and is considered 100% reclaimable.

Check printer compatibility before ordering

Verify that your desktop 3D printer accepts 2.85mm filament and can reach the 235-245C nozzle temperature range. The material is recommended for intermediate users due to its slower printing requirements compared to entry-level filaments. Ensure your slicer settings can accommodate the specific speed and temperature profile for PET co-polymer. This ten-spool case quantity suits users with consistent production needs.

Puncte forte

  • Polymer rated for direct food contact and containers
  • 10 spools of 2.85 mm filament in one case
  • Very low shrinkage eases printing on large flat surfaces
  • High-strength PET co-polymer stronger than ABS
  • Prints at 235-245 °C on unheated beds

Specificații

ColorBlack
TypeFilament

Întrebări despre acest articol

Should I choose the 10-spool case or buy individual spools for this 2.85 mm black t-glase?

The product is sold as a 10-spool case; each spool is 1 lb of 2.85 mm black filament, so the case provides 10 lb total.

What nozzle temperature should I set for this t-glase filament on my printer?

The manufacturer recommends printing at 235-245 °C for best results with this PET co-polymer.

Does the 2.85 mm diameter work with Bowden and direct-drive extruders?

The 2.85 mm filament is compatible with most desktop 3D printers that accept 2.85 mm stock, including both Bowden and direct-drive setups.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.