Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Thermaltake

Thermaltake S200 Plus TG ARGB Snow PC case CA-1X2-00M6WN-01

SKU CH-BJJR-KSMPB MPN CA-1X2-00M6WN-01

White mid-tower case with tempered glass panel, three pre-installed 120mm ARGB Lite fans and front USB 3.0 ports

  • TypeMid Tower
  • ColorWhite
  • Case MaterialSPCC
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard Compatibility6.7" x 6.7" (Mini ITX) 9.6" x 9.6" (Micro ATX) 12" x 9.6" (A

Options S200 (Snow)

  • S200 (Black)
  • S200 (Snow)

Versiunile tăiate există, dar nu sunt disponibile aici.

  • White mid-tower case built from SPCC steel
  • Three 120 mm ARGB Lite fans pre-installed at the front
  • 3 mm tempered glass side panel shows the interior
  • Supports ATX, Micro ATX and Mini ITX motherboards
  • Fits graphics cards up to 330 mm long without a radiator

White mid-tower for ATX builds

The Thermaltake S200 Plus TG ARGB Snow is a white SPCC mid-tower that accepts Mini ITX, Micro ATX and ATX motherboards. It ships with three pre-installed 120mm ARGB Lite front fans and a single 3mm tempered glass side panel. The mesh front panel and built-in PSU cover suit clean white-themed builds.

Front I/O limited to USB 3.0 and audio

Front-panel connectivity provides two USB 3.0 ports and one HD audio jack. No USB-C or higher-speed USB interfaces are present. Builders needing modern front-panel standards should verify motherboard header availability before choosing this chassis.

GPU clearance depends on front radiator

Maximum graphics-card length is 300mm with a front radiator fitted and 330mm without one. CPU cooler height is capped at 166mm and power-supply length at 190mm when the HDD cage is installed. These three dimensions determine component compatibility.

Puncte forte

  • White mid-tower case built from SPCC steel
  • Three 120 mm ARGB Lite fans pre-installed at the front
  • 3 mm tempered glass side panel shows the interior
  • Supports ATX, Micro ATX and Mini ITX motherboards
  • Fits graphics cards up to 330 mm long without a radiator

Specificații

BrandThermaltake
SeriesS Series
ModelS200 Plus TG ARGB
Part NumberCA-1X2-00M6WN-01
TypeMid Tower
ColorWhite
Case MaterialSPCC
With Power SupplyNo
Power Supply MountedBottom
Motherboard Compatibility6.7" x 6.7" (Mini ITX)
9.6" x 9.6" (Micro ATX)
12" x 9.6" (ATX)
Side Panel3mm Tempered Glass x 1
Internal 3.5" Drive Bays2 x 3.5", 2 x 2.5" or 1 x 3.5", 3 x 2.5"
Expansion Slots7
Front Ports2 x USB 3.0, 1 x Audio
Fan OptionsFront: 3 x 120mm, 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm
Top: 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm
Rear: 1 x 120mm
Front(intake): 120 x 120 x 25 mm ARGB Lite fan (1000rpm, 22.3 dBA) x 3
Pre-installed FansFront - 1 x 120mm
Radiator OptionsFront: 1 x 360mm, 1 x 240mm, 1 x 120mm, 1 x 280mm, 1 x 140mm
Top: 1 x 240mm, 1 x 120mm
Rear: 1 x 120mm
Max GPU Length300mm (with radiator) / 330mm (without radiator)
Max CPU Cooler Height166 mm
Max PSU Length190mm (with HDD Cage)
Dimensions18.11 x 8.27 x 15.56 inch
Weight10.8 lbs
Greutate la expediere5.81 kg
Dimensiunile coletului508 × 432 × 267 mm

Întrebări despre acest articol

Will a 360 mm radiator fit in the front if I keep the three pre-installed ARGB fans?

The front supports a 360 mm radiator, but the three pre-installed 120 mm fans occupy the front mounts. You must remove or relocate those fans to install the radiator.

What is the longest graphics card I can install without a front radiator?

Without a front radiator the case accepts graphics cards up to 330 mm in length.

Can I mount a 2.5 inch SSD behind the motherboard tray?

The internal drive configuration lists two 3.5 inch bays that also accept 2.5 inch drives, plus an alternative layout with three 2.5 inch positions. No dedicated behind-the-tray SSD mounts are specified.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.