Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Compact Mini-ITX tower in gravel sand finish with mesh side panel

Thermaltake

Thermaltake TR100 SFF PC Case Gravel Sand CA-11A-00SGNN-00

SKU CH-W9DZ-ERB6N MPN CA-11A-00SGNN-00

Mini-ITX tower with dual-chamber layout, 18.9-litre volume, 360 mm GPU clearance and included PCIe 4.0 riser cable

  • Motherboard CompatibilityMini ITX
  • ColorGravel Sand
  • Case MaterialSPCC
  • TypeTower Computer Cases
  • Side PanelMesh Panel
  • Internal 2.5" Drive Bays2
  • Compact 18.9-litre dual-chamber design fits Mini-ITX builds
  • 360 mm GPU clearance with 70 mm thickness support
  • Included PCIe 4.0 riser cable enables modern GPU bandwidth
  • 280 mm AIO radiator support plus top 120 mm or 140 mm fan mounts
  • Removable PCIe bracket and integrated GPU brace simplify installation

Compact Mini-ITX Chassis for Portable Builds

The Thermaltake TR100 is an 18.9-litre dual-chamber case designed for Mini-ITX motherboards and SFX power supplies. It targets enthusiasts who want a small-footprint system that remains easy to transport. A PCIe 4.0 riser cable is included to connect the graphics card in the separate GPU chamber.

Suits Builders Prioritising Portability

This case fits users who need 360 mm graphics-card clearance and up to 280 mm radiator support in a compact tower. It is not for builders who require 3.5-inch drive bays, ATX motherboard support, or CPU coolers taller than 68 mm. The lack of pre-installed fans also means you must supply your own cooling.

68 mm CPU Cooler Height Limit Decides Compatibility

The maximum CPU cooler height of 68 mm is the critical constraint for component selection. Only low-profile air coolers or thin AIO units will fit in the right chamber. Verify your cooler specification against this figure before purchase to avoid clearance issues.

Puncte forte

  • Compact 18.9-litre dual-chamber design fits Mini-ITX builds
  • 360 mm GPU clearance with 70 mm thickness support
  • Included PCIe 4.0 riser cable enables modern GPU bandwidth
  • 280 mm AIO radiator support plus top 120 mm or 140 mm fan mounts
  • Removable PCIe bracket and integrated GPU brace simplify installation

Specificații

Motherboard CompatibilityMini ITX
ColorGravel Sand
Case MaterialSPCC
TypeTower Computer Cases
Side PanelMesh Panel
BrandThermaltake
ModelCA-11A-00SGNN-00
Internal 2.5" Drive Bays2
Expansion Slots3
Fan OptionsTop:
2 x 120mm, 1 x 120mm
2 x 140mm, 1 x 140mm
Pre-installed FansNo Fan Installed
Radiator OptionsTop Side(AIO):
1 x 240mm, 1 x 120mm
1 x 280mm, 1 x 140mm
Max GPU Length360 mm
Max CPU Cooler Height68 mm
Max PSU Length130 mm
Greutate la expediere4.54 kg
Dimensiunile coletului483 × 305 × 203 mm

Întrebări despre acest articol

What motherboard form factor do I already need for the TR100 Gravel Sand case?

You need a Mini-ITX motherboard, as the case only supports that form factor.

Will my existing 360 mm long graphics card fit alongside the PCIe 4.0 riser cable in this chassis?

Yes, the case allows GPUs up to 360 mm in length and 70 mm thick, and the included riser cable routes the card into the left chamber.

How can I verify the case airflow is adequate after installing top fans and an AIO radiator?

Monitor CPU and GPU temperatures under load; the mesh side panels and support for two 120 mm or 140 mm top fans plus a 280 mm radiator are designed for strong thermal performance.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.