BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280128BTC
În stoc
YINGHUA
YINGHUA X99 Dual LGA2011 Server Motherboard 2×E5-2620 V3
Dual-socket X99 server board with two E5-2620 V3 CPUs, eight DDR4 ECC slots up to 32 GB each, six SATA 3.0 ports and dual PCIe x16 slots
- CPU TypeIntel Atom
- Dual LGA 2011 sockets host two E5-2620 V3 CPUs for multi-threaded workloads
- Eight DDR4 slots accept up to 32 GB modules each at 2800 MHz
- Six SATA 3.0 ports plus two M.2 slots provide flexible storage options
- Four USB 3.0 and four USB 2.0 ports connect peripherals at speed
- Integrated Realtek 8111H gigabit Ethernet delivers reliable network connectivity
Dual LGA2011 workstation board
This YINGHUA X99 motherboard ships with two E5-2620 V3 processors installed and supports up to eight DDR4 ECC modules at 2133, 2400 or 2800 MHz. It targets builders assembling a multi-socket server or render node who want a ready-to-run dual-CPU platform without sourcing matched CPUs separately. The board provides six SATA 3.0 ports and two M.2 slots that accept PCIe-only or PCIe and SATA drives. Buyers who need more than 16 cores per socket or integrated 10 GbE should look elsewhere.
Thermals and power in normal use
The package includes a switch cable for front-panel power control but does not contain CPU coolers, so thermal performance depends entirely on the heatsinks you choose for the LGA2011 sockets. Two 6-core processors at stock frequency draw moderate power under typical server loads, yet sustained all-core work will require adequate airflow across the VRM area. No fan headers or fan curves are detailed in the supplied data. Builders planning quiet operation must select low-RPM coolers and verify case clearance themselves.
Bundled accessories and software impact
A single SATA cable and the front-panel switch cable are the only items included beyond the board and the two CPUs. No driver disc, management utility or RAID key is mentioned, so operating-system installation and remote-management setup rely on standard Intel and Realtek 8106E or 8111H drivers. The lack of additional cables means you must source extra SATA leads for every drive beyond the first. Software-wise, the hardware offers no proprietary monitoring or overclocking tools.
Puncte forte
- Dual LGA 2011 sockets host two E5-2620 V3 CPUs for multi-threaded workloads
- Eight DDR4 slots accept up to 32 GB modules each at 2800 MHz
- Six SATA 3.0 ports plus two M.2 slots provide flexible storage options
- Four USB 3.0 and four USB 2.0 ports connect peripherals at speed
- Integrated Realtek 8111H gigabit Ethernet delivers reliable network connectivity
Specificații
| CPU Type | Intel Atom |
|---|
Întrebări despre acest articol
How do I install the two E5-2620 V3 CPUs into the LGA 2011 sockets, and what step is often missed?
Align each CPU triangle marker with the socket corner, lower gently without force, then secure the retention lever; the step often missed is applying thermal paste before mounting the cooler on both sockets.
What maintenance will the DDR4 ECC memory slots and SATA 3.0 ports need over time?
Reseat memory modules if errors appear, clean slot contacts with compressed air, and check SATA cables for firm seating; no scheduled replacement is required for the slots or ports themselves.
Which limit appears first when the dual E5-2620 V3 system runs sustained workloads?
The 100 Mbit REALTEK 8106E network interface saturates before the CPU or memory bandwidth, capping throughput on continuous data transfers.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
