Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Soft-rubber handled cleaning needle, ten stainless needles in a box, copper wire brush for 1.75mm nozzles

YOOPAI Nozzle Cleaning Kit 0.4mm 10 needles 1.75mm

SKU CH-CD15-XSPY4

Clears clogged 1.75 mm nozzles with 10 stainless-steel needles, a handled pick and a copper wire brush

  • TypeNozzle Cleaning Kit
  • Ergonomic soft-rubber handle eases grip during nozzle clearing
  • 10 stainless-steel 0.4 mm needles with storage box tackle stubborn clogs
  • Copper wire brush removes residue without damaging hot-end surfaces
  • 150 mm needle length reaches deep into 1.75 mm nozzles without disassembly
  • Compatible with Bambu Lab, Creality K and Ender-3 V3 series printers

YOOPAI 0.4 mm nozzle cleaning kit

The YOOPAI kit provides a handled needle, ten 0.4 mm stainless steel needles in a storage box and a copper wire brush for clearing blockages in 1.75 mm filament nozzles. It fits popular Bambu Lab, Creality and Ender-3 V3 series printers as well as other machines using 1.75 mm filament. The soft rubber handle is shaped to match the nozzle tip so cleaning can be done without removing the nozzle.

0.2–0.5 mm needle range limits debris removal

Needles cover diameters from 0.2 mm to 0.5 mm, so only blockages within that size window can be cleared mechanically. The handled needle measures 150 mm long and 1.5 mm wide, restricting access to nozzles with compatible tip geometry. Copper brush bristles suit external heat-sink cleaning but cannot reach deep internal clogs beyond the needle length.

Replaces improvised pins and single-purpose tools

This kit replaces makeshift wires, individual acupuncture needles or basic brushes that lack a storage box and ergonomic handle. The jump is worth it when you maintain multiple 1.75 mm printers and want organised, repeatable nozzle maintenance without disassembly. Users needing larger-diameter cleaning or automated purge routines will find the 0.5 mm ceiling restrictive.

Puncte forte

  • Ergonomic soft-rubber handle eases grip during nozzle clearing
  • 10 stainless-steel 0.4 mm needles with storage box tackle stubborn clogs
  • Copper wire brush removes residue without damaging hot-end surfaces
  • 150 mm needle length reaches deep into 1.75 mm nozzles without disassembly
  • Compatible with Bambu Lab, Creality K and Ender-3 V3 series printers

Specificații

BrandYOOPAI
ModelNozzle Cleaning Kit
Part NumberNozzle Cleaning Kit
TypeNozzle Cleaning Kit

Întrebări despre acest articol

Which needle diameter should I pick for my 0.4mm nozzle?

The kit includes 10 stainless-steel needles sized 0.2–0.5mm; the 0.4mm needle matches a 0.4mm nozzle bore for precise clearing without widening the opening.

What does the 1.5mm handle diameter mean when I am cleaning a hot nozzle?

The 1.5mm handle shaft fits through a 1.75mm nozzle throat so you can push debris out without removing the nozzle from the hotend.

How does the copper-wire brush work with the 1.75mm filament standard?

The brush bristles are sized to scrub the exterior tip and heat-break face of any 1.75mm hotend, removing burnt residue while the copper conducts heat away safely.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.