Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White dual-fan graphics card with metal backplate, compact two-slot design

ZOTAC

ZOTAC ZT-D40600Q-10M GeForce RTX 4060 8GB graphics card

SKU CH-2DJ4-PV2KJ MPN ZT-D40600Q-10M

Refurbished GeForce RTX 4060 with 8GB GDDR6, dual 90mm fans, PCIe 4.0 and a 221mm white dual-slot design

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 40 Series
  • GPUGeForce RTX 4060
  • CUDA Cores3072
  • Effective Memory Clock17000 MHz
  • DLSS 3 and Ada Lovelace architecture accelerate ray-traced frames
  • 8 GB GDDR6 at 17 Gbps on a 128-bit bus feeds high-resolution textures
  • Twin 90 mm fans with freeze stop and metal backplate keep thermals quiet
  • Four display outputs drive 8K at 7680 x 4320 across multiple monitors
  • 115 W TDP and single 8-pin power fit compact 221 mm builds

Compact 8GB GPU for 1080p gaming

The ZOTAC GeForce RTX 4060 8GB Twin Edge OC White Edition uses the Ada Lovelace architecture with 3072 CUDA cores and 8GB GDDR6 memory on a 128-bit bus. It connects via PCI Express 4.0 and fits a 2-slot form factor measuring 221 mm long. The card targets 1080p gaming and multi-monitor productivity with four display outputs.

Sustained 115W load with 2490 MHz boost

Under continuous load the GPU runs at a 115 W thermal design power while the boost clock reaches 2490 MHz. Memory operates at 17000 MHz effective across the 128-bit interface. The board draws power through a single 8-pin connector and the manufacturer recommends a 500 W power supply for stable operation during extended sessions.

Dual 90mm fans with freeze stop and metal backplate

Two 90 mm fans provide active cooling and stop completely when the core temperature drops low enough for silent idle. A metal backplate adds structural rigidity and helps spread heat away from the PCB. The card supports HDCP 2.3 and outputs up to 7680 x 4320 resolution over HDMI 2.1a and three DisplayPort 1.4a ports.

Puncte forte

  • DLSS 3 and Ada Lovelace architecture accelerate ray-traced frames
  • 8 GB GDDR6 at 17 Gbps on a 128-bit bus feeds high-resolution textures
  • Twin 90 mm fans with freeze stop and metal backplate keep thermals quiet
  • Four display outputs drive 8K at 7680 x 4320 across multiple monitors
  • 115 W TDP and single 8-pin power fit compact 221 mm builds

Specificații

BrandZOTAC
SeriesGaming
ModelZT-D40600Q-10M
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 40 Series
GPUGeForce RTX 4060
CUDA Cores3072
Effective Memory Clock17000 MHz
Memory Size8GB
Memory Interface128-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1a
DisplayPort3 x DisplayPort 1.4a
ColorWhite
Max Resolution7680 x 4320
CoolerDouble Fans
Thermal Design Power115W
Recommended PSU Wattage500W
Power Connector8-Pin
HDCP ReadyYes
Form FactorATX
Max GPU Length221 mm
Slot Width2 Slots
Greutate la expediere1.01 kg
Dimensiunile coletului297 × 231 × 91 mm

Întrebări despre acest articol

How loud or hot does the ZOTAC RTX 4060 Twin Edge OC get when running all day at its 115W TDP?

The card uses two 90mm fans with a FREEZE Fan Stop feature that halts the fans at low load, keeping noise minimal. Under sustained load the 115W TDP is dissipated through a dual-fan cooler and metal backplate.

What power supply and connector does this 115W card require to work?

A 500W power supply with a single 8-pin PCIe power connector is recommended for the ZOTAC RTX 4060.

Will the PCIe 4.0 x8 interface and 221mm length of this card work in an older PCIe 3.0 system and a compact case?

The card operates at PCIe 4.0 speeds but is backward compatible with PCIe 3.0 motherboards. Its 221mm length and dual-slot design fit most ATX and many mid-tower cases.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.