Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small square black case fan 70 by 15 millimetres with three pin connector

Zyvpee

Zyvpee 2806RL-04W-B49 CA2 70mm 12V 3-pin case fan

SKU CH-FC1Q-49CME

A 70 mm square case fan with ball bearing, 12 V 0.28 A three-pin power and 15 mm thickness for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling Fan
  • Ball bearing ensures durable operation
  • 12 V 0.28 A power draw for efficient cooling
  • 70 mm by 15 mm frame fits tight builds
  • Three-pin connector enables speed monitoring
  • Non-LED black design keeps system aesthetics clean

Compact 70mm case fan

The Zyvpee 2806RL-04W-B49 CA2 is a 70mm square frame fan designed for CPU cooling in tight chassis. It runs on 12V power and draws 0.28A through a standard 3-pin connector. The ball bearing supports continuous operation in workstations or small-form-factor builds. Non-LED black finish keeps the appearance neutral.

Ball bearing thermals and 3-pin control

Ball bearing construction reduces friction compared with sleeve alternatives, helping the fan maintain steady airflow at lower noise levels over time. The 3-pin header allows the motherboard to monitor speed and adjust voltage for quieter idle states. Power draw stays at 0.28A, so the load on a 12V rail is minimal. The 15mm thickness fits standard 7015 mounting patterns.

Mounting hardware and verification

Four corner holes accept standard 70mm screws for direct attachment to heatsinks or case panels. The supplier provides physical photos so buyers can confirm connector orientation and blade profile before purchase. No software, lighting controller or adapter cables are included in the package. Email contact is available if the images do not match the intended application.

Puncte forte

  • Ball bearing ensures durable operation
  • 12 V 0.28 A power draw for efficient cooling
  • 70 mm by 15 mm frame fits tight builds
  • Three-pin connector enables speed monitoring
  • Non-LED black design keeps system aesthetics clean

Specificații

BrandZyvpee
Series2806RL-04W-B49 CA2
Model2806RL-04W-B49
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions70 * 15mm

Întrebări despre acest articol

How do I mount the 70 mm fan with 3-pin connector?

Align the four screw holes on the 70 mm frame with the case or heatsink mounts, then secure with standard 70 mm fan screws; the 3-pin plug goes to a 3-pin motherboard header or fan controller.

When will the ball bearing need replacement?

Ball bearings typically run for tens of thousands of hours; replace the fan if noise increases, vibration appears, or speed drops noticeably under 12 V load.

What limits continuous operation at 0.28 A?

The 3 W motor and ball bearing set the thermal ceiling; sustained 12 V use is safe while case airflow keeps the 70 x 15 mm frame within its normal temperature range.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.