Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square 80x25mm case fan with 2-pin connector

Zyvpee

Zyvpee AD0812HS-A70GL 80x25mm 12V 2-pin case fan

SKU CH-5JXM-QYQQA

80 mm sleeve-bearing fan runs on 12 V and draws 0.25 A through a 2-pin connector

  • TypeCase Fan
  • Bearing TypeSleeve bearing
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • 80 mm square frame fits tight chassis spaces
  • 25 mm thickness suits standard 80 mm mounting holes
  • Sleeve bearing keeps acoustic profile low
  • 12 V 0.25 A draw limits power load
  • 2-pin connector enables simple motherboard or controller hookup

Compact 80mm cooling for tight builds

This Zyvpee AD0812HS-A70GL fan fits 80 by 80 by 25 millimetre mounts in small-form-factor cases or on low-profile CPU coolers. It runs on 12 volt DC power through a simple two-pin connector and draws point two five amps. The sleeve bearing keeps the unit light and inexpensive for basic airflow needs.

Two-pin power means fixed speed operation

The two-wire connection supplies voltage without a PWM or tachometer signal so the fan spins at a constant rate determined by the motherboard or controller. There are no LEDs or extra cables in the box so installation is limited to plugging the header into a 12 volt fan socket. Software control or RPM monitoring is not available with this connector type.

Sleeve bearing and square frame suit static

The black plastic frame uses a DC square cooler design that directs air straight through heatsink fins rather than scattering it. Sleeve bearings run quietly at low speeds but can wear faster than ball bearings if the fan is mounted horizontally or subjected to high temperatures. The two-pin plug locks securely but offers no speed feedback to the system BIOS.

Puncte forte

  • 80 mm square frame fits tight chassis spaces
  • 25 mm thickness suits standard 80 mm mounting holes
  • Sleeve bearing keeps acoustic profile low
  • 12 V 0.25 A draw limits power load
  • 2-pin connector enables simple motherboard or controller hookup

Specificații

SeriesAD0812HS-A70GL
ModelAD0812HS-A70GL
TypeCase Fan
Bearing TypeSleeve bearing
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

Întrebări despre acest articol

How often does the sleeve bearing in the AD0812HS-A70GL need lubrication or replacement?

Sleeve bearings in this fan are not user-serviceable; when the bearing wears the fan is typically replaced rather than re-lubricated.

What thermal or current limit is reached first if the AD0812HS-A70GL runs continuously at 12 V?

The motor draws 0.25 A at 12 V, so the current limit of the 2-pin connector and the coil winding temperature are the first constraints under sustained load.

How much noise and heat does the AD0812HS-A70GL generate when running all day?

The fan moves air through an 80 mm frame at 12 V and 0.25 A, producing a low-level hum and modest warmth typical of a sleeve-bearing DC square cooler.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.