Zyvpee
Zyvpee AFB1212SHE 120mm 12V 1.6A 3-pin case fan
A 120 mm ball-bearing case fan with a 3-pin connector runs on 12 V and draws 1.6 A for steady airflow
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- High airflow for cooling with 120 mm diameter and 38 mm thickness
- Reliable ball-bearing design reduces friction for longer service life
- Simple 3-pin power connector fits standard motherboard headers
- 12 V 1.6 A rating delivers strong performance for case ventilation
- Non-LED black finish keeps builds clean and distraction-free
120 mm DC axial case fan
The Zyvpee AFB1212SHE is a 120 mm DC axial fan built for standard case cooling. It uses a ball bearing and a 3-pin power connector. The frame measures 120 by 38 mm and has a black finish without LED lighting.
Builders who need a 12 V 1.6 A 3-pin fan
This unit suits builds that accept a 12 V 1.6 A draw on a 3-pin header. It is not for systems that require PWM speed control or addressable RGB illumination. Buyers wanting a slimmer frame or a different voltage should look elsewhere.
12 V 1.6 A power rating decides fit
The 12 V 1.6 A rating is the single figure that determines whether the fan matches the header and power budget. Verify the motherboard header can supply that current before installing.
Puncte forte
- High airflow for cooling with 120 mm diameter and 38 mm thickness
- Reliable ball-bearing design reduces friction for longer service life
- Simple 3-pin power connector fits standard motherboard headers
- 12 V 1.6 A rating delivers strong performance for case ventilation
- Non-LED black finish keeps builds clean and distraction-free
Specificații
| Brand | Zyvpee |
|---|---|
| Series | AFB1212SHE |
| Model | AFB1212SHE |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 120*38mm |
| Package Contents | refer to title |
Întrebări despre acest articol
Will the 120mm by 38mm frame fit my case's 120mm mount?
The fan measures 120mm square and 38mm thick, so it fits any standard 120mm mounting holes that can accept a 38mm depth.
How do I connect the 3-pin connector so the motherboard reads speed correctly?
Align the three pins with the motherboard's 3-pin fan header; the keyed shroud prevents reverse insertion, and the tach wire reports RPM to the BIOS.
When should I expect to replace the ball bearing in the AFB1212SHE?
Ball bearings typically run for tens of thousands of hours; replace the fan when noise increases noticeably or RPM drops below spec.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



