Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 120 by 32 millimetre case fan with three-pin connector

Zyvpee

Zyvpee AFB1248HF-R00 120x32mm 48V 0.17A 3-pin case fan

SKU CH-A2JK-HJ6NY

A 120x32mm case fan with ball bearing and 3-pin 48V 0.17A power for focused airflow

  • TypeCase Fan
  • Fan Size110mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • High airflow from 120 mm frame and 32 mm depth
  • Reliable ball bearing for continuous 48 V operation
  • Low 0.17 A draw keeps power use minimal
  • Standard three-pin connector fits common headers
  • Non-LED black design suits any build aesthetic

48 V 120 mm server fan

This 120 mm by 32 mm case fan runs on 48 V DC at 0.17 A and uses a three-pin power connector. It is built for servers, industrial chassis or workstations that already supply a 48 V rail and need high-static-pressure airflow in a compact frame. Buyers who only have standard 12 V motherboard headers cannot use this unit.

Ball bearing thermals and acoustics

The ball bearing design delivers consistent rotational stability under continuous load while keeping mechanical noise predictable over time. At the rated voltage and current the fan draws modest power, allowing dense multi-fan arrays without overloading the 48 V distribution bus. No LED lighting means no extra electrical load or visual distraction in rack environments.

Replaces 48 V 120x32 mm ball-bearing fans

This model directly substitutes legacy 48 V fans of the same 120 mm by 32 mm footprint and three-pin wiring. The upgrade is worthwhile when the original unit has developed bearing rattle, reduced RPM or outright failure, restoring full cooling capacity in the existing chassis. It does not suit builds that require PWM speed control or 12 V operation.

Puncte forte

  • High airflow from 120 mm frame and 32 mm depth
  • Reliable ball bearing for continuous 48 V operation
  • Low 0.17 A draw keeps power use minimal
  • Standard three-pin connector fits common headers
  • Non-LED black design suits any build aesthetic

Specificații

Brand3ccooler.com
SeriesAFB1248HF -R00
ModelAFB1248HF -R00
TypeCase Fan
Fan Size110mm
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions120*32mm

Întrebări despre acest articol

How do I install the Zyvpee AFB1248HF-R00 fan and which step is often missed?

Mount the 120mm frame using four screws, connect the 3-pin header to a 48V fan header, and verify the yellow wire reports speed in BIOS — that check is the step most builders skip.

What maintenance or replacement will the Zyvpee AFB1248HF-R00 need later?

The ball bearing is sealed for life; no lubrication is required. Plan to replace the fan only if airflow drops or noise rises after extended 48V operation.

What limit appears first on the Zyvpee AFB1248HF-R00 under sustained 48V load?

Continuous 48V 0.17A draw makes bearing wear the first long-term limit; the 3-pin connector cannot reduce voltage, so the fan always runs at full speed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.