Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 51 by 25 mm case fan with two wires

Zyvpee

Zyvpee BM5125-04W-B40 51x25mm 12V 0.17A 2-pin case fan

SKU CH-3Y27-BXJTX

Compact 51 x 25 mm case fan with ball bearing runs on 12 V at 0.17 A using a two-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 51 × 25 mm frame fits tight projector builds
  • Ball bearing delivers reliable long-life operation
  • 12 V 0.17 A draw keeps power use low
  • Two-pin connector enables simple plug-in installation
  • Non-LED black design suits discreet cooling setups

Compact 51×25 mm case fan

The Zyvpee BM5125-04W-B40 is a 51 mm square, 25 mm thick case fan built around a ball-bearing motor. It runs on 12 V DC at 0.17 A through a two-pin power connector and carries no lighting. The black frame targets compact enclosures such as projector housings or small-form-factor PCs where a low-profile cooler is required.

Fits tight layouts with two-wire power

Because the fan draws only 0.17 A from a standard 12 V rail, it can be powered directly from a motherboard header or a fan controller without a PWM circuit. The 51×25 mm footprint clears narrow brackets and leaves room for adjacent components, while the ball bearing tolerates varied mounting angles. No additional wiring or adapters are needed beyond the supplied two-pin lead.

Suits space-constrained cooling.

Buyers replacing a projector or slim-chassis fan of the same dimensions will find a direct mechanical match. The two-pin design means speed is voltage-dependent, so systems that require PWM control or higher static pressure should look elsewhere. The absence of RGB or addressable lighting also makes it unsuitable for showcase builds that rely on visual effects.

Puncte forte

  • Compact 51 × 25 mm frame fits tight projector builds
  • Ball bearing delivers reliable long-life operation
  • 12 V 0.17 A draw keeps power use low
  • Two-pin connector enables simple plug-in installation
  • Non-LED black design suits discreet cooling setups

Specificații

BrandZyvpee
SeriesBM5125-04W-B40
ModelBM5125-04W-B40
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesProjector Cooling Fan
Dimensions51*25MM

Întrebări despre acest articol

What sustained-load limit appears first with the BM5125-04W-B40's ball bearing and 0.17 A draw?

The ball bearing and 0.17 A current set the thermal and electrical ceiling; sustained 12 V operation will hit bearing temperature limits before the motor overloads.

How much noise and heat does the 51×25 mm frame produce when running 12 V all day?

At 0.17 A the fan draws about 2 W, so heat output is low; ball-bearing noise is a steady whisper that stays constant during continuous 12 V use.

Which 12 V two-pin header must my board already have for this 5125 fan to work?

A standard 12 V two-pin fan header on the motherboard or controller is required; the BM5125-04W-B40 plugs directly onto that connector.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.