Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 40 by 28 millimetre case fan with three wire connector

Zyvpee

Zyvpee FFB0412SHN 40x28mm 12V 0.6A 3-pin case fan

SKU CH-8WFS-B6Q4K

A 40×28 mm 12 V 0.6 A ball-bearing case fan with a three-pin connector for CPU cooler use

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40×28 mm frame fits tight CPU coolers
  • Ball bearing runs quietly at 12 V 0.6 A
  • Three-pin connector enables simple motherboard control
  • Non-LED black design keeps builds clean and professional
  • DC motor delivers steady airflow for small-form-factor systems

40 mm Ball-Bearing Case Fan

The Zyvpee FFB0412SHN is a 40 by 28 mm DC case fan built for CPU cooler mounts. It runs on 12 V and draws 0.6 A through a standard three-pin connector. The black frame carries no LEDs, making it suited for builds that prefer a clean, non-illuminated look. Ball-bearing construction targets longer service life in continuous operation.

Installation Notes

The three-pin plug fits any standard motherboard or fan-controller header keyed for 12 V DC fans. Because the frame is only 28 mm thick, verify that the mounting holes on your cooler or chassis match the 40 mm spacing before fitting. The ball bearing can produce a faint mechanical hum at full voltage; speed control via BIOS or software usually reduces this. No screws are included, so reuse the original fasteners from the cooler.

Pre-Purchase Checklist

Confirm that the target cooler or case accepts a 40 by 28 mm fan with three-pin 12 V input. Check the available header type — some compact boards only provide four-pin PWM headers that may not voltage-control a three-pin device. Ensure the 0.6 A draw does not exceed the header’s rated current limit. Buyers needing RGB lighting, larger airflow, or PWM speed signalling should look at other models.

Puncte forte

  • Compact 40×28 mm frame fits tight CPU coolers
  • Ball bearing runs quietly at 12 V 0.6 A
  • Three-pin connector enables simple motherboard control
  • Non-LED black design keeps builds clean and professional
  • DC motor delivers steady airflow for small-form-factor systems

Specificații

BrandZyvpee
SeriesFFB0412SHN
ModelFFB0412SHN
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions40*28mm

Întrebări despre acest articol

How can I confirm the FFB0412SHN is running correctly after installation?

The fan should spin steadily when the system powers on; with its 3-pin connector the motherboard can report the RPM so you can verify it matches the expected speed for a 12 V 0.6 A ball-bearing unit.

What comes with the FFB0412SHN and what must I source separately?

The package contains the 40×28 mm black case fan with a 3-pin power lead; you will need a compatible 3-pin header on the motherboard or a fan controller, plus any mounting screws required by your chassis.

Which version of the FFB0412SHN should I choose for a CPU cooler?

The listed model FFB0412SHN F00 is a single 12 V 0.6 A ball-bearing variant in 40×28 mm size, so select this exact part when the cooler calls for those specifications.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.