Zyvpee
Zyvpee KD0504PKB2 40mm 20mm 5V 1.0W 2-wire case fan
A 40 mm by 20 mm case fan running at 5 V and 1.0 W with a two-wire connector for CPU cooler heat dissipation
- TypeCase Fan
- CompatibilityCPU Cooler
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- FeaturesDC FAN
- Compact 40×20 mm footprint fits tight chassis spaces
- 5 V 1.0 W draw keeps power load minimal
- Two-wire connector enables simple voltage control
- Non-LED black frame suits stealth builds
- Designed for CPU cooler heat dissipation
Zyvpee KD0504PKB2 40 mm 5 V DC fan
The Zyvpee KD0504PKB2 is a compact 40 mm by 20 mm case fan that runs on 5 V DC power and draws 1.0 W. It uses a two-wire connector and has no LED lighting. The black frame suits small-form-factor chassis and CPU coolers that need a thin, low-voltage airflow source.
Suits builds with 5 V two-pin headers
This fan fits systems that provide a 5 V two-pin header and have room for a 20 mm thick frame. Buyers who need PWM speed control or a three-pin or four-pin connector cannot use this model. Units that require higher static pressure or a larger frame should consider other options.
5 V 1.0 W two-wire power specification
The decisive specification is the 5 V 1.0 W two-wire power input. If the motherboard or controller supplies a different voltage or uses a three-pin or four-pin header, the fan will not operate correctly. Verify the header type and voltage before purchase.
Puncte forte
- Compact 40×20 mm footprint fits tight chassis spaces
- 5 V 1.0 W draw keeps power load minimal
- Two-wire connector enables simple voltage control
- Non-LED black frame suits stealth builds
- Designed for CPU cooler heat dissipation
Specificații
| Brand | Zyvpee |
|---|---|
| Series | KD0504PKB2 |
| Model | KD0504PKB2 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC FAN |
| Dimensions | 40*20mm |
Întrebări despre acest articol
How can I verify the KD0504PKB2 is spinning correctly after installation?
Connect the 2-wire lead to a 5 V header and confirm the blades rotate smoothly without vibration or noise.
What comes in the box with the KD0504PKB2 and what must I source myself?
The fan unit only; you will need a 5 V 2-pin power header or adapter and mounting screws for the 40 mm frame.
Which KD0504PKB2 variant should I choose for a 40 mm by 20 mm mounting area?
This single model matches the 40x20 mm footprint and 5 V 1.0 W rating; no other capacity or version is offered.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



