Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver AC axial fan with four-wire connection and ball bearing

Zyvpee

Zyvpee R4E355-AK05-12 230V 50/60Hz 0.8/1.14A 180/260W IP44 4Wire industrial cooling fan

SKU CH-1G19-3ECHW

AC axial fan with 2-ball bearing delivers over 80 CFM at 230V 50/60Hz for FFU cabinet cooling

  • TypeAC axial fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Air Flow>80 CFM
  • ColorSilver
  • LEDNon-LED
  • Dual-frequency 50/60 Hz operation suits global power grids
  • 230 V AC input matches standard industrial supply
  • IP44 rating protects against splashing water and dust
  • Two-ball bearing design extends service life
  • Four-wire interface enables inverter speed control

Zyvpee R4E355-AK05-12 AC axial fan

This new Zyvpee R4E355-AK05-12 is an AC axial fan built for industrial cooling duties. It runs on 230V supply at 50/60Hz and draws 0.8/1.14A for a power rating of 180/260W. The unit carries an IP44 rating and uses a four-wire connection suited to FFU cabinet inverter installations.

Suited to 230V AC systems with four-wire control

Engineers specifying 230V AC ventilation for cabinets or FFU units will find the voltage, frequency and wiring match. The 2-ball bearing supports continuous operation in industrial environments. Buyers needing DC input voltages or a different wire count should look elsewhere, as the motor is rated for 230V AC only.

230V 50/60Hz 0.8/1.14A 180/260W IP44 4Wire

The single specification that decides fit is the 230V 50/60Hz 0.8/1.14A 180/260W IP44 4Wire rating. It defines the supply voltage, current draw, power envelope, ingress protection and control wiring required for integration. Confirm these values against your system before purchase.

Puncte forte

  • Dual-frequency 50/60 Hz operation suits global power grids
  • 230 V AC input matches standard industrial supply
  • IP44 rating protects against splashing water and dust
  • Two-ball bearing design extends service life
  • Four-wire interface enables inverter speed control

Specificații

SeriesR4E355-AK05-12
ModelR4E355-AK05-12
TypeAC axial fan
CompatibilityCase
Bearing Type2 Ball
Air Flow>80 CFM
ColorSilver
LEDNon-LED
FeaturesAC Axial Fan

Întrebări despre acest articol

What voltage supply do I need to run the R4E355-AK05-12 fan?

The fan operates on a 230 V AC supply at either 50 Hz or 60 Hz, drawing 0.8 A at 50 Hz and 1.14 A at 60 Hz.

Will the four-wire connection work with my existing fan-speed controller?

The 4-wire lead is designed for FFU cabinet inverter control; compatibility depends on whether your controller accepts that specific inverter signal format.

How can I confirm the fan is delivering its rated airflow after installation?

With the supply at 230 V, measure the current — approximately 0.8 A at 50 Hz or 1.14 A at 60 Hz — and verify the IP44-rated housing is spinning freely, indicating airflow above 80 CFM.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.