Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Aqua LSZH duplex fiber patch cord with LC connectors at both ends, 10 metre length

10Gtek

10Gtek LC-LC OM3 Duplex 50/125 LSZH 10m 33ft

SKU CH-E2CX-YN1YW

A 10-metre OM3 duplex patch cord with LC connectors, LSZH jacket and bend-insensitive 50/125 fibre for 10 Gigabit links

  • TypeFiber
  • Color1 Pack
  • Length33 ft.
  • Connector Number2

Option 1 Pack

Length 32.8 ft.

  • Low-loss signal with 0.3dB insertion loss
  • 10GbE and Fibre Channel ready up to 1200-MX
  • Bend-insensitive 7.5mm radius for tight installs
  • LSZH jacket cuts smoke and toxic fumes
  • 10m duplex LC-LC with ceramic ferrules

LC-LC OM3 duplex patch cord for 10 GbE links

This 10-metre multi-mode cable carries 850 nm and 1300 nm wavelengths over a 50/125 µm bend-insensitive core. LSZH jacket and ceramic ferrule LC connectors deliver insertion loss of .3 dB and return loss of 30 dB per TIA-568-C.3. Suited for SAN, 10GBase-S/LR4/LRM and Fibre Channel up to 1200-MX.

Verify LC duplex ports

Confirm both ends of your link use LC duplex transceivers rated for 50/125 µm OM3 fibre at 850 nm or 1300 nm. Ensure the 2.0 mm jacket and 7.5 mm bend radius fit your cable management and rack space. Not for single-mode or OS2 infrastructure.

Bend-insensitive design

BIMMF construction allows four times tighter bends than standard 50 µm cable, easing dense patch-panel or tray routing. LSZH material reduces smoke and halogen emission in plenum or riser runs. Ceramic ferrules with PC polish maintain low loss after repeated mating.

Poudarki

  • Low-loss signal with 0.3dB insertion loss
  • 10GbE and Fibre Channel ready up to 1200-MX
  • Bend-insensitive 7.5mm radius for tight installs
  • LSZH jacket cuts smoke and toxic fumes
  • 10m duplex LC-LC with ceramic ferrules

Specifikacije

Brand10Gtek
TypeFiber
Color1 Pack
Length33 ft.
Connector Number2

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Does the 10 metre LSZH patch cord ship with both LC duplex connectors already fitted, or must I terminate them myself?

The cable arrives with LC duplex connectors on both ends, factory polished and tested to .3 dB insertion loss and 30 dB return loss, so no field termination is required.

When should I choose this OM3 50/125 µm bend-insensitive cable over an OM4 or single-mode alternative?

Select this OM3 duplex cord when your links run 10 GbE 10GBase-SR, 1000Base-SX/LX, or Fibre Channel up to 1200-MX over distances supported by 850/1300 nm multimode, and you need the 7.5 mm bend radius for dense patch panels.

What does the .3 dB insertion loss figure mean once the cord is plugged into a live 10 GbE link?

Each connector pair typically adds only .3 dB loss, leaving ample margin for the 10 GbE 10GBase-SR power budget over the full 10 metre length at 850 nm.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.