NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
A-Tech
128GB DDR4 2933 ECC LRDIMM module with CL21 latency and 1.2V operation for Fujitsu-compatible servers
This 128GB DDR4 2933MHz ECC LRDIMM module replaces Fujitsu part numbers S26361-F4083-L929 and S26361-F4083-E929. It is built for server systems that require registered, load-reduced memory to support high-capacity configurations. The single 288-pin DIMM operates at 1.2V with a CAS latency of 21.
The load-reduced design reduces electrical load on the memory bus, allowing the platform to populate more slots at rated speed than standard registered DIMMs. On-board ECC corrects single-bit errors to protect data integrity in mission-critical workloads. No heat spreader is fitted, so airflow across the module relies on the server chassis design.
Confirm the motherboard and BIOS explicitly support DDR4 LRDIMM modules at 2933MHz and 8Rx4 rank structure. Mixed populations with RDIMM or different rank counts may disable the slot or down-clock the channel. Check the system qualified-vendor list for the exact Fujitsu part numbers before ordering.
| Brand | A-Tech |
|---|---|
| Series | Fujitsu RAM Equivalent Replacement Memory |
| Model | S26361-F4083-L929, S26361-F4083-E929 |
| Part Number | S26361-F4083-L929, S26361-F4083-E929 |
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4) |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Equivalent Replacement for Fujitsu S26361-F4083-L929, S26361-F4083-E929 |
The module ships without a heat spreader and requires no firmware update; install it in a compatible 288-pin DDR4 slot and the server BIOS will initialise the ECC LRDIMM automatically.
The CAS latency of CL21 and the 1.20V operating voltage set the timing and power envelope; sustained throughput is bounded by the DDR4 2933 bus speed and the 8Rx4 3DS rank architecture.
At the standard DDR4 1.20V the module draws minimal power for its density, and with no heat spreader it relies on server chassis airflow to stay within normal operating temperatures.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?