Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two green circuit boards with black chips and gold contacts, 240 pins each

A-Tech

A-Tech 16GB Kit (2x8GB) DDR3/DDR3L 1600MHz PC3-12800 CL11 240-pin Desktop RAM

SKU CH-ZM9S-F07DW

A 16GB dual-channel DDR3/DDR3L kit with two 8GB modules running at 1600MHz for compatible desktop upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • Tested Frequency1600
  • Voltage1.35V - 1.50V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

Speed DDR3L 1600 (PC3L 12800)

  • 16 GB total capacity from two 8 GB modules for multitasking headroom
  • DDR3 and DDR3L dual-voltage support at 1.35 V or 1.50 V for broad desktop compatibility
  • 1600 MHz tested speed with CL11 latency for responsive system performance
  • 240-pin UDIMM form factor fits standard desktop memory slots
  • Non-ECC unbuffered design with 2Rx8 organisation for reliable everyday operation

16 GB DDR3/DDR3L Desktop Kit

This kit contains two 8 GB unbuffered DIMMs rated at 1600 MHz with CL11 latency. The modules operate at 1.35 V or 1.5 V and fit standard 240-pin desktop sockets. They are built for DDR3 and DDR3L platforms that accept non-ECC memory.

Suitable for DDR3 desktop upgrades

Owners of compatible DDR3 or DDR3L desktops needing 16 GB of non-ECC memory can install this dual-rank kit. Systems that require ECC or registered modules cannot use these DIMMs. Buyers should confirm their motherboard supports 1.35 V or 1.5 V DDR3L before purchasing.

Dual-voltage 1.35 V / 1.5 V operation

The single specification that decides fit is the module voltage range. If the platform only accepts 1.5 V DDR3, these modules will still work at that voltage. If it requires 1.35 V DDR3L, the low-voltage capability is already present. Match the board's supported voltage to the kit's dual-voltage rating.

Poudarki

  • 16 GB total capacity from two 8 GB modules for multitasking headroom
  • DDR3 and DDR3L dual-voltage support at 1.35 V or 1.50 V for broad desktop compatibility
  • 1600 MHz tested speed with CL11 latency for responsive system performance
  • 240-pin UDIMM form factor fits standard desktop memory slots
  • Non-ECC unbuffered design with 2Rx8 organisation for reliable everyday operation

Specifikacije

BrandA-Tech
Capacity16GB (2 x 8GB)
SpeedDDR3L 1600 (PC3L 12800)
Tested Frequency1600
Voltage1.35V - 1.50V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseSelect Compatible DDR3 Desktops

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Do I need a motherboard with 240-pin DDR3 slots to use this 16GB kit?

Yes, the modules are 240-pin UDIMMs built for DDR3 and DDR3L desktop boards that accept unbuffered non-ECC memory.

Can I mix these 1.35V DDR3L sticks with older 1.5V DDR3 modules in the same system?

The kit runs at 1.35V or 1.50V, so it will operate at the voltage your board sets for the installed memory.

How can I confirm the kit is running at 1600MHz CL11 after installation?

Check the memory tab in CPU-Z or your BIOS; it should report 1600 MT/s with timings of 11-11-11.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.