Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 1.5V DIMM 240-Pin Desktop RAM

SKU CH-GNWY-R898R

A 4 GB DDR3 desktop module running at 1600 MHz with CL11 latency and 1.5 V on a 240-pin DIMM

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds headroom for everyday multitasking
  • DDR3 1600 MHz speed moves data quickly
  • CL11 latency keeps response times tight
  • 5V standard voltage fits stock desktop boards
  • 240-pin DIMM form factor slots straight in

A-Tech 4GB DDR3 1600MHz Desktop Memory

This A-Tech module delivers 4GB of DDR3 memory at 1600MHz with CL11 latency and 1.5V operation. It uses the standard 240-pin DIMM form factor for desktop systems. The unbuffered, non-ECC design suits mainstream consumer motherboards. All units are tested to meet PC3-12800 specifications.

Suits DDR3 desktop upgrades.

This module fits desktop boards that accept DDR3 1600MHz DIMMs without ECC or registered buffering. It will not work in notebooks that require SO-DIMMs, nor in servers needing registered or ECC memory. Verify your system supports 1.5V DDR3 before purchasing.

240-pin DDR3 DIMM keying decides physical fit

The 240-pin DDR3 DIMM keying determines whether the module seats correctly in your motherboard slots. Only boards with matching DDR3 DIMM sockets will accept this part. Check your manual or current memory to confirm the slot type matches.

Poudarki

  • 4GB capacity adds headroom for everyday multitasking
  • DDR3 1600 MHz speed moves data quickly
  • CL11 latency keeps response times tight
  • 5V standard voltage fits stock desktop boards
  • 240-pin DIMM form factor slots straight in

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKHX1600C9D3T1K2/8GX, KVR16N11/4
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesKHX1600C9D3T1K2/8GX, KVR16N11/4
Recommend UseCompatible Replacement for Kingston KHX1600C9D3T1K2/8GX, KVR16N11/4

Vprašanja o tem izdelku

Will the 240-pin DIMM fit my standard desktop DDR3 slot?

Yes, the module uses the 240-pin DIMM form factor standard for desktop DDR3 memory.

What is the correct way to seat the module so the notch aligns with the slot key?

Align the notch on the module edge with the key in the slot, press down firmly until both side clips click into place.

Does this 1.5V DDR3 module need any firmware updates or periodic re-seating over time?

No firmware updates are required; the module is tested at 1600 MHz CL11 and runs at standard 1.5V for the life of the system.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.