Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green 240-pin DDR3L UDIMM with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V Server Memory

SKU CH-KBN0-J7HTN

4GB DDR3L 1333 ECC unbuffered DIMM with 2Rx8 organisation and 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity with built-in error correction
  • DDR3L 1333 MHz speed delivers responsive server performance
  • Low 1.35V voltage reduces power draw and heat output
  • 240-pin UDIMM form factor fits standard DDR3 slots
  • Direct replacement for Hynix HMT351U7 series modules

A-Tech 4GB DDR3L 1333 ECC UDIMM

This module is a 4GB DDR3L server memory stick built for systems that require ECC unbuffered DIMMs. It suits administrators upgrading compatible workstations or servers where data integrity matters. The 240-pin form factor fits standard DDR3 DIMM slots in supported platforms.

PC3L-10600 speed with CL9 latency

The decisive specification is the DDR3L 1333 speed rated as PC3L-10600 with CAS latency CL9. Your motherboard and processor must support this exact speed grade and voltage for the module to operate correctly. Verify the system documentation before purchase.

Low-voltage operation at 1.35V

Running at 1.35V reduces power draw and heat output compared to standard 1.5V DDR3 modules. The unbuffered ECC design adds minimal overhead while maintaining signal integrity. Typical server workloads see stable thermals without extra cooling requirements.

Poudarki

  • ECC protection guards data integrity with built-in error correction
  • DDR3L 1333 MHz speed delivers responsive server performance
  • Low 1.35V voltage reduces power draw and heat output
  • 240-pin UDIMM form factor fits standard DDR3 slots
  • Direct replacement for Hynix HMT351U7 series modules

Specifikacije

BrandA-Tech
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vprašanja o tem izdelku

What does the 1333 speed rating mean for actual throughput in a server?

The module operates at DDR3L 1333 MT/s with CL9 latency, delivering the standard data rate for PC3L-10600 when installed in a compatible platform.

How does the DDR3L 1.35 V standard affect power use and compatibility?

DDR3L runs at 1.35 V, reducing power draw versus 1.5 V DDR3; it will operate at 1.35 V in systems that support the low-voltage spec and at 1.5 V in standard DDR3 slots.

What physical slot and clearance does the 240-pin UDIMM need?

It fits a standard 240-pin DDR3 DIMM socket and uses the unbuffered UDIMM form factor, so ensure the board has an unbuffered slot and enough height clearance for the module.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.