Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green 240-pin DDR3L UDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V Server Memory

SKU CH-VYHG-Q6HX0

4GB DDR3L 1600 ECC UDIMM module with 2Rx8 organisation and 1.35V low-voltage operation for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • DDR3L 1600 MHz speed supports PC3L-12800 bandwidth
  • Low 1.35 V voltage cuts power draw and heat
  • 240-pin UDIMM form factor fits compatible server boards
  • Direct replacement for Micron MT18KSF51272AZ-1G6 part numbers

A-Tech 4GB DDR3L 1600 ECC UDIMM

This 4GB DDR3L module runs at 1600MHz with CL11 latency and 1.35V low-voltage operation. It uses a 240-pin UDIMM form factor with ECC error correction and unbuffered signalling. The 2Rx8 rank organisation uses major-brand chips for server and workstation workloads.

Server and workstation upgrades needing ECC UDIMM

Suited for systems that require DDR3L ECC unbuffered memory at 1.35V. Not for platforms that only accept registered or load-reduced DIMMs, nor for boards limited to standard 1.5V DDR3 without low-voltage support. Buyers needing higher density than 4GB per module should look elsewhere.

240-pin DDR3L 1600 ECC UDIMM 1.35V

The 240-pin DDR3L interface at 1.35V determines whether this module fits and functions. Verify that your motherboard specifies DDR3L 1600 ECC UDIMM support before purchasing. An incorrect voltage or missing ECC capability will prevent the module from working.

Poudarki

  • ECC protection guards data integrity in server workloads
  • DDR3L 1600 MHz speed supports PC3L-12800 bandwidth
  • Low 1.35 V voltage cuts power draw and heat
  • 240-pin UDIMM form factor fits compatible server boards
  • Direct replacement for Micron MT18KSF51272AZ-1G6 part numbers

Specifikacije

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vprašanja o tem izdelku

Will the 2Rx8 ECC chips on this DDR3L module need replacing under normal server workloads?

The module uses major-brand chips tested to A-Tech quality standards and carries a lifetime warranty, so the 2Rx8 ECC components are not a scheduled replacement item.

What limit appears first when this 1.35 V DDR3L 1600 UDIMM runs sustained loads?

The CL11 latency at 1600 MHz sets the throughput ceiling; sustained bandwidth will plateau at the PC3L-12800 rating before voltage or thermal limits are reached.

How much heat and power does a single 4 GB 240-pin DDR3L stick draw in 24/7 operation?

At 1.35 V the module draws less power and generates less heat than standard 1.5 V DDR3, keeping thermal output low during continuous server duty.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.