Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green 240-pin DDR3 DIMM with black chips and silver heatsink

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 Server Memory

SKU CH-T7NR-HA699

8GB DDR3 1333MHz ECC registered server DIMM with CL9 latency and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR3 1333MHz capacity handles demanding server workloads
  • ECC registered design detects and corrects data errors automatically
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits compatible DDR3 server slots
  • 2Rx4 dual-rank organisation boosts memory density per module

8GB DDR3 1333MHz ECC Registered DIMM

This 8GB DDR3 1333MHz PC3-10600 module is a registered ECC DIMM built for server and workstation platforms. It operates at 1.5V with CL9 latency and uses a 2Rx4 rank configuration. The module replaces Elpida EBJ81RF4BCFD-DJ-F and EBJ81RF4BDWD-DJ-F parts.

Suits servers needing registered ECC memory.

This memory fits systems that require registered ECC DDR3 DIMMs for error correction and signal integrity. It is not suitable for standard desktop motherboards that accept only unbuffered non-ECC modules.

Tested module replaces specific Elpida part numbers

Each unit undergoes quality assurance testing to verify reliable operation as a direct replacement for the listed Elpida models. The validated compatibility ensures the module meets the required specifications for supported server and workstation systems.

Poudarki

  • 8GB DDR3 1333MHz capacity handles demanding server workloads
  • ECC registered design detects and corrects data errors automatically
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits compatible DDR3 server slots
  • 2Rx4 dual-rank organisation boosts memory density per module

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for Elpida
ModelEBJ81RF4BCFD-DJ-F, EBJ81RF4BDWD-DJ-F
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesEBJ81RF4BCFD-DJ-F, EBJ81RF4BDWD-DJ-F

Vprašanja o tem izdelku

What motherboard slot is required for the 240-pin DDR3 DIMM?

The module fits a standard DDR3 240-pin DIMM socket on a server or workstation board that supports registered ECC memory.

Can I mix this 1333 MHz registered ECC module with older unbuffered DDR3 sticks?

No, registered and unbuffered DIMMs cannot be used together; the system will not POST if they are mixed.

How do I confirm the module is running at PC3-10600 with ECC active?

Check the BIOS memory information or use a tool such as CPU-Z; it should report 1333 MHz, CL9, 1.50 V and ECC enabled.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.