Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green circuit board with gold edge contacts and black memory chips

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 2Rx8 Kingston KVR16R11D8/8KF Server Memory

SKU CH-0CSN-3W6PG

8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB DDR3 1600 capacity handles demanding server workloads
  • ECC RDIMM registered design protects data integrity in critical systems
  • CL11 latency at 1.5V delivers stable DDR3 performance
  • 2Rx8 dual-rank organisation maximises memory density per slot
  • 240-pin DDR3 DIMM form factor fits compatible server motherboards

Capacity and purpose

This 8 GB DDR3 registered DIMM adds ECC-protected memory to compatible servers and workstations. It is a direct replacement for the Kingston KVR16R11D8/8KF part and suits administrators who need single-module capacity upgrades. Systems requiring unbuffered or non-ECC memory cannot use this module.

Thermals and power

The module runs at the standard DDR3 voltage of 1.50 V with a CL11 latency profile. Registered buffering reduces electrical load on the memory controller during sustained workloads. No active cooling is required on the DIMM itself.

Deciding specification

The 2Rx8 dual-rank organisation and 240-pin DDR3 form factor determine whether the motherboard can address the full 8 GB capacity. Verify that your platform supports registered ECC DDR3 at 1600 MHz before ordering.

Poudarki

  • 8GB DDR3 1600 capacity handles demanding server workloads
  • ECC RDIMM registered design protects data integrity in critical systems
  • CL11 latency at 1.5V delivers stable DDR3 performance
  • 2Rx8 dual-rank organisation maximises memory density per slot
  • 240-pin DDR3 DIMM form factor fits compatible server motherboards

Specifikacije

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vprašanja o tem izdelku

How do I install this 240-pin DDR3 RDIMM and which step do people often miss?

Align the notch on the module with the slot key, press straight down until both side clips click, and verify the system detects the full 8GB at 1600MHz in BIOS before booting the OS.

What maintenance or replacement will this ECC registered module need later?

No routine maintenance is required; the module is designed to run continuously at 1.5V CL11, and replacement is only needed if a memory test reports uncorrectable ECC errors.

What limit appears first when this 2Rx8 stick runs sustained workloads?

The registered buffer adds one cycle of latency, so the CL11 timing at 1600MHz becomes the throughput ceiling before thermal or voltage limits are reached.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.