Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DDR3 DIMM

A-Tech

A-Tech 8GB DDR3 1866MHz ECC RDIMM 1Rx4 CL13 1.5V Server RAM

SKU CH-N34C-YQGRT

8GB DDR3 1866MHz ECC RDIMM 1Rx4 CL13 1.5V replacement for Kingston KTD-PE318/8G, KVR18R13S4/8, KVR18R13S4K3/24

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in server workloads
  • Registered design adds stability for multi-module configurations
  • 1866 MHz DDR3 speed handles demanding applications
  • 1Rx4 organisation optimises density for 8 GB capacity
  • 5 V standard voltage ensures broad platform compatibility

8GB DDR3 1866MHz ECC RDIMM Server Memory

This A-Tech module delivers 8GB of DDR3 1866MHz (PC3-14900) registered ECC memory for server and workstation systems. It operates at standard 1.5V with CL13 latency and uses a 1Rx4 organisation on a 240-pin DIMM form factor. Major brand chips ensure dependable performance for compatible platforms.

Suited for DDR3 servers needing registered ECC

This memory fits systems that require DDR3 1866MHz registered ECC RDIMMs with a 1Rx4 configuration. It replaces Kingston KVR18R13S4/8, KTD-PE318/8G and KVR18R13S4K3/24 part numbers. Builders needing unbuffered non-ECC UDIMMs, different speeds, voltages or pin counts should verify their platform specifications before ordering.

Registered ECC RDIMM with 1Rx4 organisation

The module is a registered ECC RDIMM built with a single-rank 1Rx4 layout, a requirement for many server motherboards that cannot accept unbuffered or dual-rank alternatives. Confirm your system supports registered ECC DDR3 DIMMs at 1866MHz and 1.5V to ensure compatibility.

Poudarki

  • ECC protection prevents data corruption in server workloads
  • Registered design adds stability for multi-module configurations
  • 1866 MHz DDR3 speed handles demanding applications
  • 1Rx4 organisation optimises density for 8 GB capacity
  • 5 V standard voltage ensures broad platform compatibility

Specifikacije

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vprašanja o tem izdelku

What DDR3 speed does this ECC RDIMM run at, and what PC3 rating does that correspond to?

This module operates at DDR3 1866 MHz, which corresponds to the PC3-14900 standard rating.

What physical slot and pin count does this 240-pin DIMM require for installation?

It fits a standard DDR3 DIMM socket with 240 pins; the registered design also needs a server or workstation motherboard that supports registered memory.

How do I install this 1Rx4 registered module, and what alignment step is often missed?

Power down the system, open the chassis, align the module notch with the slot key, press firmly until both retention clips click, then verify the BIOS recognises the full 8 GB capacity.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.