Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2666 ECC RDIMM 1Rx8 CL19 1.2V Server RAM

SKU CH-WHF8-WY8YJ

8GB DDR4 2666 ECC registered DIMM with CL19 latency and 1.2V operation for server workloads

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR4 2666 MHz speed accelerates data throughput for responsive performance
  • ECC registered design detects and corrects single-bit errors automatically
  • CL19 latency at 1.2V balances timing efficiency with standard power draw
  • 288-pin RDIMM form factor fits compatible server and workstation slots

8GB DDR4 2666 ECC RDIMM

This 8GB DDR4 2666 ECC RDIMM module delivers registered, error-correcting memory for server and workstation platforms. The single-rank 1Rx8 organisation operates at 1.2V with CL19 timing. It targets administrators who need reliable capacity expansion in 288-pin DIMM slots.

Direct replacement for Hynix HMA81GR7AFR8N-VK

The module matches the Hynix HMA81GR7AFR8N-VK, HMA81GR7CJR8N-VK and HMA81GR7JJR8N-VK part numbers spec-for-spec. The jump is worth it when existing sticks show correctable errors or when workload growth exceeds current capacity. Builders who need higher density per slot or faster speeds should look elsewhere.

Simple DIMM insertion with standard keying

Installation follows normal 288-pin DDR4 DIMM procedure; the registered buffer requires a compatible chipset. What usually goes wrong is mixing registered and unbuffered modules or populating slots in an order the motherboard manual does not support. Verify the platform qualification list before seating the module.

Poudarki

  • 8GB capacity expands server memory for heavier workloads
  • DDR4 2666 MHz speed accelerates data throughput for responsive performance
  • ECC registered design detects and corrects single-bit errors automatically
  • CL19 latency at 1.2V balances timing efficiency with standard power draw
  • 288-pin RDIMM form factor fits compatible server and workstation slots

Specifikacije

BrandA-Tech
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vprašanja o tem izdelku

Will this 288-pin DDR4 RDIMM fit my server's memory slots?

The module uses the standard DDR4 DIMM form factor with 288 pins and registered ECC signalling, matching server boards that accept RDIMMs.

What is the correct way to seat this registered ECC module so the system recognises it?

Align the notch with the slot key, press firmly until both retention clips click, and populate slots in the order your motherboard manual specifies for registered memory.

How do I know when this 1Rx8 ECC RDIMM should be replaced?

ECC corrects single-bit errors silently; if your server logs start reporting uncorrectable errors or the module fails POST, replace it.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.